If you need 28""wide parts, we also have them.
Please check your size before you order it .this part easy to buy by mistake!
Being in Compatibilities Does NOT Guarantee Fitment. Please verify your fitment before ordering.
COMPATIBILITY:
1988-1993 CHEVY C/K TRUCK 5.7L - 7.4L
1994-1995 CHEVY C/K TRUCK 5.7L
1996-1999 CHEVY C/K TRUCK 5.0L - 5.7L
2000 CHEVY C/K TRUCK 5.7L
1992-1993 CHEVY SUBURBAN 5.7L - 7.4L
1994-1999 CHEVY SUBURBAN 5.7L
1992-1994 CHEVY C/K BLAZER 5.7L
1995-2000 CHEVY TAHOE 5.7L
1992-2000 GMC YUKON 5.7L
1999-2000 CADILLAC ESCALADE 5.7L
1999-2000 CADILLAC ESCALADE EXT 5.7L
(Please check the model list in order to fit your vehicle)
RADIATOR SIZE:
Core Size: 34" *17.08" *2.05"(863mmx433.92mmx52mm)
Overall Size: 40.6" *20.38"
Rows: 3
Inlet/Outlet: 1.26"/1.57"(32mm/40mm)
Trans Cooler: Included(￠26*292*1/2-20UNF(Z))
Package included: 1 piece Aluminum Radiator in Cartoon Box
(Please double confirm your radiator measurements before ordering)
RADIATOR ADVANTAGE
*INCREASED cooling capacity & LOWER temperature( 35 - 45% )
*DIRECT Bolt-On OE Fitment or Replacement
* LESS weight & MORE resistant
*1 YEAR Warranty Against Manufacturing Defect
*TUBE and FIN design & FULL T-6061 aluminum
*EXTRA thickness of bracket and tubes to maintain constant geometry at ALL times.
* IMPROVE handling, stability at high speed and cornering, hence safer driving.
* Minimize the weight transfer of the vehicle body, BETTER traction during cornering.
*LUXERAD aluminum radiator is designed to provide maximum cooling
efficiency to PREVENT premature engine failure.
HOW TO REPLACE THE RADIATOR:
1. Disconnect the battery.
2. Drain the radiator fluid into a suitable container.
3. Remove the old radiator:
-Take off any plastic covers around the radiator.
-Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.
-Disconnect the radiator hoses from the radiator.
-Disconnect the transmission cooling lines from the bottom of the radiator.
-Remove any clamps, brackets, or screws holding the radiator inside its frame.
-Lift the radiator up and out of the car.
4. Install the new radiator:
-Slide the new radiator into place.
-Connect any clamps or brackets that hold the radiator in place.
-Connect the transmission cooling lines carefully.
-Connect the engine cooling hoses to the radiator.
-Replace the fan and fan shroud.
-Reconnect the fan electrical connection.
-Replace the plastic covers.
5. Fill the radiator with fluid.
6. Check your work to make sure that there are no leaks.
(Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)
Note: Do please keep children and pets away when replacing the radiator)
NOTE:
1. Project operation, the vehicle normal temperature 60 to 80 degrees.
2. Add detergent if the tank is too full can take some antifreeze.
HOW TO CLEAN RADIATOR:
1. Start the vehicle, to rise to normal temperature. Slowly open the tank cover, the fluid
shake from the tank after filling the mouth, the cleaner can be mixed with any brand of coolant.
Idle running not less than 15 minutes, not cleaning vehicles not less than 30 minutes for two years.
And then discharge coolant, flush water tank, until out of clear water, suitable for any water cycle system.
2. After cleaning, after waiting for pipeline rehabilitation add fluid to water tank, and inject new coolant and water purification.
SHIPMENT
Our shipment is divided into two warehouses: City of Industry- CA , NY ect.
According to your address, we will choose the nearest warehouse to deliver the goods to you in the fastest way.
All orders will be sent within one business day after payment received. Carrier : UPS ground
We do not ship to P.O. Box, APOs, FPOs, or Military Mail Box. CAN'T SHIP TO HI,VI,AK,PR,GU and so .
Thank you for visiting our store~!
