Description：
We have more than 20 configurations and the prices are different.
So，the same type of chain, perhaps you can choose the machine that is more expensive, the work efficiency will be higher.

Choose suggestions:
Fine teeth: strong strength, suitable for paper edge > 7mm products
Single tooth: Widely applicable. Suitable for trays above 150g, single-layer carton, cutting width >10mm
Double teeth: strong strength and smooth work. Suitable for all kinds of cardboard, carton, cutting width greater than 12mm
Large single tooth: suitable for wide and thick carton (three layers, four layers, five layers of carton), cutting width greater than 15mm

Note：
1. When using, it is necessary to determine the order according to the actual template and the position of the stripping knife.
2, after use, spray anti-rust oil on the chain to clean the chain, use a dust blower to blow off the paper dust, then add a little lubricant
3, paper jam: disconnect the air circuit (very important), if the chain can not be rotated, loosen the sheath screw, take out each screw, turn the chain rail to remove the paper, install the screw, continue to use
4, the tension of the chain must be checked frequently, and adjust the tension when needed, after adjustment, if the longest section of the chain is in the horizo??ntal state, the sag distance is about 1mm, indicating that the tension adjustment is basically correct . An excessively loose chain will damage the collision surface of the safety shield during the rotation.