eBay

Feature:

1. NE5532P Chip: Other op amp chip such as OPA2604AP OP275G TL072, etc. can also be replaced, very simple and practical.
2. Board Structure: 3 channel output, treble, bass, midrange, which ensures good sound quality and more audio enjoyment.
3. Crossover Point: 500HZ, 5kHZ, that is, 20HZ‑500HZ is bass output, 500HZ‑5KHZ is midrange output, 5KHZ‑20KHZ is treble output.
4. Filter Type: Subtractive divider, also comes with ‑24dB/Oct attenuation slope, so the preamp module has high efficiency.
5. Easy to Install: Designed to have a light weight and a compact size as well, the installation is very convenient.

Specification:

Item Type: Preamp Module
Model: NE5532
Material: PCBA
Attenuation Slope: -24dB/Oct
Product Size: Approx. 98 x 84 x 20mm / 3.86 x 3.31 x 0.79in
Power: DC positive and negative, dual 9-15V.

Package List:

1 x Preamp Module

Note:

The 10k resistor in the picture above cannot be changed.

The R calculated by the calculation software is too large, such as C=1nF, f=5kHz, according to the f=0.707/(2X314Rc) the data is very accurate, R=22k. So the following number.

According to (Increase C by 10 times, R remains unchanged, f becomes 1/10 of the original) For reference only:

When C=1nF, f=5kHz, R=225k (the accurate data should be 22k)

C=1nF, f=4.7kHz f, R=24K.

C=1nF, f=4.4kHz #f, R=256k.

C=1nF, f=4.1kHz f, R=183k

C=1nF, f=3.8kHz Hf, R=19.7k.

When C=1.5nF, f=3.5kH, R=214kC=1.5nF

When f=35kHz, R=21.4k

When C=15nF, f=32kHz, R=235k (I used C=15nF, R=22k, use the f=3333Hz, use soft piece f=3410Hz)

C=2.2nF, f=3kHz Hf, R=17k

C=2.2nF, f=2.8kHz Hf, R=183k

C=2.2nF, f=2.5kHz f, R=20.5k.

C=2.2nF, f=2.2KHz Hf, R=233k

C=2.7nF, f=2.2kHz Bf, R=19k.

C=2.7nF, f=2KHz Hf, R=20.8k.

C=3.3nF, f=1.8kHz Hf, R=19k.

C=3.3nF, f=1.5kHz f, R=22.7k

When C=47nF=1.3kH, R=184k

C=4.7

At 1kHz, R=24k

C=6.8nF, f=1kHz f, R=16.6k.

When C=68nF, f=900Hz, R=18.4k

C=6.8nF, f=800Hz f, R=20.7k

C=6.8nF, f=700kHz Hf, R=23.6K.

When C=10nF, f=700Hz, R=16.1k

C=10nF, f=600Hz Hf, R=18.8k.

When C=10nF, f=500Hz, R=225k (the accurate data should be 22k)

The good effect is related to the relative accuracy of the resistance and capacitance data, especially the resistance needs to be relatively consistent in size. Choose the largest and smallest capacitance in the parallel connection place, so that the error will be smaller.

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

https://image-us.chengykj.com/upload/third_resource/image/shipc73.jpg