Note:
●  Compatible List can not show up all Car model. Please confirm whether the item matches your car before  purchase.


This listing compatible with 3 pairs (9005 + 9006 + 9145) 6000K white super bright LED headlight high beam + low beam + fog light bulbs conversion kit.
Headlight Bulbs Specifications:
●  Bulb Socket: 9005/HB3 high beam + 9006/HB4 low beam
●  LED Quantity(each bulb): 4pcs* COB Bridgelux chips (4-sides), 360 degree clear beam no blind zone
●  Technology: Bulit in driver & cooling fan
●  Operating Voltage:  DC 9V ~ 32V , Fit for 12V / 24V vehicle.
●  Wattage: 50W per bulb
●  Luminous Flux: 20000 LM per set
●  Color temperature: 6000K
●  Light color: Cool White
●  Material: Aviation 6063 aluminum profile
●  Beam Angle: 360 degree
●  Operating Temperature: -40 - +85 degree Celsius
●  Waterproof Rate: IP68 rated Waterproof and dust seal, works well even in extreme weather
●  Lifespan: over 50000 hours life time, stable quality and long service life
●  Application: headlight high beam + low beam
●  Built-in constant current CPU,instant full brightness without start-up relay
●  Easy plug and play design, no resistor or modification needed.
●  The bulb body size of our bulb is smaller than other 4-sided LED bulbs on the market, no need to worry about interference with the dust cover.
Two-way Heat Dissipation Channel:
1. All-in-one aluminum profile as heat conduction system, 360 degree heat radiating.
2. Built-In Turbo Cool Fan, High speed 12000 r/min, high air flow for faster cooling rate.

Fog Light Bulbs Specifications:
●  Bulb Size: 9145 9140 H10
●  Color: 6000K Xenon White
●  LED Quantiy: 10pcs Per Bulb
●  LED Type: SMD High Power Chip
●  Beam Type: 360° Beam Angle
●  Operating Voltage:  DC 9V ~ 32V , Fit for 12V & 24V vehicle.
●  High Power: 50W/bulb
●  Luminous Flux: 3200LM per set
●  Material: Aaluminum profile and virtually unbreakable PMMA Lens
●  Long-lasting Lifespan 50000 Hours
●  Plug and Play Easy Installation
●  Fast on/off Response Time and Vibration Resistant

Package Include:
●  2x 9005 LED high beam bulbs
●  2x 9006 LED low beam bulbs
●  2x 9145 LED fog light bulbs

Automotive LED headlamps advantages:
1. LED lights than traditional halogen energy, more power.
2. Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
3. Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable.Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .
4. Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
5. LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
6. Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K.

Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.