eBay

Gigabyte GA-X99 Gaming 5 Intel X99 Chipset LGA2011-3 DDR4 M.2 USB 3.0 Gb LAN Motherboard

Note: Motherboard Bios updated to latest version f23c (See picture #6,7 for bios screens) and tested (see picture #8,9). Found some minor scratches due to normal used but it won't effect the performance of the motherboard. Motherboard only. No I/O shield, no other accessories. Perfect for a replacement.

Ship Fast!

Gigabyte GA-X99 Gaming 5

CPU
1. Support for Intel^® Core™ i7 processors in the LGA2011-3 package
2. Support for Intel^® Xeon^® E5-1600 / E5-2600 / E5-4600 v3 / v4 processors in the LGA2011-3 package
3. L3 cache varies with CPU
(Please refer "CPU Support List" for more information.)
Chipset
1. Intel^® X99 Express Chipset
Memory
1. 8 x DDR4 DIMM sockets supporting up to 128 GB of system memory
  * Support for up to 512 GB of system memory when using Registered DIMMs.
  * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
2. 4 channel memory architecture
3. Support for DDR4 2800(O.C.) / 2666(O.C.) / 2400(O.C.) / 2133 MHz memory modules
4. Support for non-ECC memory modules
5. Support for Extreme Memory Profile (XMP) memory modules
6. Support for RDIMM 1Rx8/2Rx8 memory modules (operates in non-ECC mode)
(Please refer "Memory Support List" for more information.)
Audio
1. Creative^® Sound Core 3D chip
2. Support for Sound Blaster Recon3Di
3. TI Burr Brown^® OPA2134 operational amplifier
4. High Definition Audio
5. 2/5.1-channel
6. Support for S/PDIF Out
LAN
1. Qualcomm^® Atheros Killer E2201 LAN chip (10/100/1000 Mbit)
Expansion Slots
1. 2 x PCI Express x16 slots, running at x16 (PCIE_1/PCIE_2)
  * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIE_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIE_1 and PCIE_2 slots.
2. 2 x PCI Express x16 slots, running at x8 (PCIE_3/PCIE_4)
  * The PCIE_4 slot shares bandwidth with the PCIE_1 slot. When the PCIE_4 slot is populated, the PCIE_1 slot will operate at up to x8 mode.
  * When an 28 lane CPU is installed, the PCIE_2 slot operates at up to x8 mode and the PCIE_3 operates at up to x4 mode.
  (All PCI Express x16 slots conform to PCI Express 3.0 standard.)
3. 3 x PCI Express x1 slots
  (The PCI Express x1 slots conform to PCI Express 2.0 standard.)
4. 1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)
Multi-Graphics Technology
1. Support for NVIDIA^® Quad-GPU SLI™ and 4-Way/3-Way/2-Way NVIDIA^® SLI™ technologies
2. Support for AMD Quad-GPU CrossFireX™ and 4-Way/3-Way/2-Way AMD CrossFire™ technologies
* The 4-Way NVIDIA^® SLI™ configuration is not supported when an i7-5820K CPU is installed. To set up a 3-Way SLI configuration, refer to "1-6 Setting up AMD CrossFire™/NVIDIA^® SLI™ Configuration."
Storage Interface
Chipset:
1. 1 x M.2 PCIe connector
  (Socket 3, M key, type 2260/2280 SATA & PCIe x2/x1 SSD support)
2. 1 x SATA Express connector
3. 6 x SATA 6Gb/s connectors (SATA3 0~5)
4. Support for RAID 0, RAID 1, RAID 5, and RAID 10
  * Only AHCI mode is supported when an M.2 PCIe SSD or a SATA Express device is installed.
  (M2_10G, SATA Express, and SATA3 4/5 connectors can only be used one at a time. The SATA3 4/5 connectors will become unavailable when an M.2 SSD is installed in the M2_10G connector.)
Chipset:
1. 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only
  (An operating system installed on the SATA3 0~5 connectors cannot be used on the sSATA3 0~3 connectors.)
USB
Chipset:
1. 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
2. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
Chipset + Renesas^® uPD720210 USB 3.0 Hub:
1. 4 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 1 x PCIe power connector
4. 1 x I/O shield audio LED power connector
5. 1 x heatsink LED power connector
6. 1 x M.2 Socket 3 connector
7. 1 x SATA Express connector
8. 10 x SATA 6Gb/s connectors
9. 1 x CPU fan header
10. 1 x water cooling fan header (CPU_OPT)
11. 3 x system fan headers
12. 1 x front panel header
13. 1 x front panel audio header
14. 1 x USB 3.0/2.0 header
15. 2 x USB 2.0/1.1 headers
16. 1 x Thunderbolt add-in card connector
17. 1 x Clear CMOS jumper
18. 1 x audio gain control switch
Back Panel Connectors
1. 1 x PS/2 keyboard port
2. 1 x PS/2 mouse port
3. 6 x USB 3.0/2.0 ports
4. 4 x USB 2.0/1.1 ports
5. 1 x optical S/PDIF Out connector
6. 1 x RJ-45 port
7. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In/Mic In, Line Out, Headphone)
8. 2 x Wi-Fi antenna connector holes
I/O Controller
1. iTE^® I/O Controller Chip
H/W Monitoring
1. System voltage detection
2. CPU/System/Chipset temperature detection
3. CPU/CPU OPT/System fan speed detection
4. CPU/System/Chipset overheating warning
5. CPU/CPU OPT/System fan fail warning
6. CPU/CPU OPT/System fan speed control
  * Whether the fan speed control function is supported will depend on the cooler you install.
BIOS
1. 2 x 128 Mbit flash
2. Use of licensed AMI UEFI BIOS
3. Support for DualBIOS™
4. Support for Q-Flash Plus
5. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features
1. Support for APP Center
  * Available applications in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specifications.
  @BIOS
  Ambient LED
  EasyTune
  EZ Setup
  Fast Boot
  Game Controller
  Cloud Station
  ON/OFF Charge
  Smart TimeLock
  Smart Recovery 2
  System Information Viewer
  USB Blocker
  V-Tuner
2. Support for Q-Flash
3. Support for Smart Switch
4. Support for Xpress Install