Description

This manual resistor forming machine is easy to operate and master. You can adjust the size of each processing part with the non-slip adjustment knob to meet your different needs for processing components. Its all-metal construction is durable and wear-resistant, ensuring a long service life. It will be your ideal choice!

Key Features

Robust and Durable: Its housing is made of high-quality iron with a painted surface, which is sturdy, durable, rust-proof, and corrosion-proof, ensuring a long service life.

High-quality Cutter: The cutter is made of durable steel with a sharp blade, which has high strength, high toughness, and good cutting ability, giving you a better user experience.

Adjustable Forming Span: The forming span can be adjusted by loosening the set screw on the cutting gear and moving the cutting gear inside and outside to meet your different needs.

Adjustable Forming Angles: You can loosen the butterfly screw on the forming plate and move the forming plate inside and outside to get different forming angles of the processing components.

High Efficiency: This resistor forming machine can complete both forming and foot cutting at the same time, with high processing capacity, saving your time.

Economical and Safe: This resistor forming machine is hand-cranked without the need for a power connection, which is economical, energy-saving, and safe.

Exquisite Workmanship: The cutting gear, forming gear, round cutter, and forming sheet are quenched and forged, hardened for high hardness, good toughness, impact resistance, anti-abrasion, and not easy to be broken, ensuring good processing performance.

Compact and Lightweight: It is compact (7.87*7.87*6.88in) and lightweight (22lbs), which can be easily operated with a small tabletop and is convenient for you to carry.

Excellent After-sales Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us, and we will reply and solve the problem for you as soon as possible.

Details

Comfortable Hand Shank: It is equipped with a large-sized hand Shank, made of solid cast iron, which is comfortable to hold and easy to operate, so you won't feel tired even after working for a long time.

Anti-slip Feet: It has four non-slip feet at the bottom to keep the machine running stably. It also prevents the table from being scratched.

Components Collection Box: It is equipped with a collection box to store molding components and the extracted tape ends, making it convenient to operate and easy to organize.

Fixing Bar: The fixing bar is made of solid steel with a smooth surface that is not easily deformed, making it easier to slide the forming sheet fixing base.

Application

It is suitable for forming and cutting different electronic components such as taping resistors and diodes.

How to Operate

1. Unscrew the plum twist on the feed clamp and move the feed clamp to both sides of the machine.

2. Loosen the set screw on the forming gear with the Allen key and let the two forming gears move closer to the forming piece. Please note that the clearance between the forming plate and the forming gear is slightly larger than the wire diameter of the component.

3. Place the rewinder and the forming sheet in the middle of the two forming gears. The clearance between the two sides of the forming piece is slightly larger than the wire diameter of the component to avoid damaging the component when forming. (If the forming sheet is not centered in the middle of the forming gear, please adjust the knob on the side of the fixing bar to make the forming sheet centered)

4. Loosen the fixing screws on the cutting gear with the Allen key respectively.

5. Adjust the distance between the cutting gear and the forming gear to the desired size. Tighten the set screws on the cutting gear.

6. Adjust the span. There is an Allen screw on the aluminum base to adjust the span. Turning the Allen screw clockwise will result in a smaller span while turning it counterclockwise will result in a larger span.

7. Place the braiding component on the hanging pole.  

8. Adjust both feed clips so that the width is the same as the width of the braiding component and allow the braiding component to pass through the feed slot. Tighten the plum screw on the feed clip.

The component is placed between the forming tooth and the cutting tooth.

9. After the above process is completed. Turn the lever at a constant speed, making the components follow the forming gears one by one and feed them into the cutting gears and circular cutter for processing, and then the forming gears and the forming sheet finish the forming process.

10. The processed parts are dropped into the container through the rewinder until all the components are processed.

Specification

Housing Material: Iron

Cutter Material: Steel

Fixing Bar Material: Solid Steel

Hand Shank Material: Solid Cast Iron

Surface Treatment: Painted

Craftsmanship: Quenched and Forged, Hardened

Color: Blue, Black, Silver
Processing Type: F Type

Packing Size: 34*31*40cm/13.38*12.2*15.74in

Product Size: 20*20*17.5cm/7.87*7.87*6.88in

Hanging Pole Length: 19cm/7.48in

Hand Shank Length: 16cm/6.29in

Handle Length: 10cm/3.93in

Gross Weight: 12kg/26.45lbs

Net Weight: 10kg/22lbs

Package Included

1 x Resistor Forming Machine

1 x Hanging Pole

1 x Support Bar

1 x Hand Shank

1 x Components Collector

1 Set x Allen Keys

1x Chinese Manual

Notes

1. When using this machine, please check whether all fastening screws are tightened.

2. Cutting gear, forming gear, circular cutting knife, and forming sheet are heat-treated parts, which should avoid collision with each other to produce fracture.

3. The bending gap should be adjusted according to the wire diameter of the component leads, and the standard is not to expose the copper.  A slight flattening of the component lead is normal.

4. After each process, please remove the waste in time.

5. When not working for a long time, the parts should be protected with a little oil and wiped off before use.

6. Please do not bite the body of the component into the gear, which may break the gear.

7. Please add a little 40# motor oil every 3-5 days. Shaping axle, and cutting axle should always keep lubrication. Please add a little 40# motor oil every 3-5 days.

8. The distance between each part on both sides should be symmetrical when placed, otherwise, it will affect the exit material.

9. Before installation and use, please check the packing list and read the manual carefully.

10. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.