Product Description
Please Note:

This item located in Czech Republic and only shipped to European countries,

If you need to return the item for some reasons, please contact us via eBay message firstly to get the RMA#,and return address instead of sending iit back directly without permission,thank you!


Xhorse MULTI-PROG Pro-level Progarmmer Read, Write, Clone E/CU T/CU Support Factory Usage Mode for Batch Progarmming of Chips


Xhorse MULTI-PROG Pro-level  progarmmer is a reading and writing device for automotive chips, electronic modules, especially E/CU modules. It integrates the progarmming, reading, writing and cloning functions of common automotive MCUs, automotive memory chips, common electronic modules and automotive EC/U boards. 


Multi-PROG Pro-level  progarmmer supports batch writing of chips, and batch writing of chips is often used in factories when production requires large-scale writing of chips. The types of writes supported are common memory series and common microcontroller series. For the specific usage of batch writing, please refer to the documentation of the factory usage mode that comes with the software.

Batch progarmming function: Multi-PROG devices support factory usage mode for batch progarmming of chips. In this mode, the functions of batch progarmming, offline progarmming, and file offline progarmming can be realized. The main difference between Xhorse VVDI PROG progarmmer and Xhorse MULTI-PROG Pro-level  progarmmer is that  MULTI-PROG Pro-level  progarmmer has the batch progarmming function but VVDI PROG progarmmer does not.


Lifetime Free Update Online.


TOP 8 Reasons to Get Xhorse Multi-Prog:

1. Built-in update software: Make Multi-Prog firmware update timely.

2. High-speed USB communication interface: Make software automatically connect.

3. Smart operation mode: possible causes of error will be listed

4. Reserve ports: For future update.

5. Self-test function: Check if the machine works well or not.

6. Power supply: Through USB cable, software will automatically prompt if the external USB power supply is needed

7.Get free For BMW ISN read function and NEC, MPC, Infineon etc chip continously update service


Xhorse Multi-Prog Functions:

1. Read, Write and Clone EC/U

For BMW B48/B58 reading ISN 

For BMW MSD80/81 /85/87/MSV90

For Mercedes-Benz SIM271

For BMW MSV80

For V.W BOSCH MED17 Series EC/U 

For BMW N13/N20/N55/B38/TC17X

Support Marelli, Siemens, Delphi and other EC/U manufacturers

With Free MQB48 License. Bind Multi-prog and VVDI2 full version to the same Xhorse app account to use MQB48 NEC35XX function

Also Compatiable with Xhorse MQB Solder-free Adapters


2. Read, Write and Clone TC/U

For Vo-lkswagen Audi Skoda DQ200, DQ250, VL381 TC'U etc.

For Porsche DL501 TC'U

For Ford Dodge and other MPS6 series T'CU

For BMW DKG, Mercedes-Benz VCS and other models TC'U


3. Vehicle Engine Data Calculation and Processing

MEDl 7/EDC17 data processing


4. Support Flexible Extension of Third-party Plug-ins

Support the development of third-party plug-ins and provide data processing and modification services


5. Read & Write MCU

Support reading and writing MCU of various brands including For Renesas, For Motolora, For NXP, For Infineon, etc.

Support certain encrypted chip reading and writing


6. Read & Write Vehicle Immo Module
Support For Porsche, For Land Rover, For Mercedes-Benz EZS, For VOLVO,
For V.W MQB dashboard, AUDI BCM2, etc.
Support modules including For BMW EWS, CAS1 \CAS2\CAS3\CAS4+, FEM BDC, etc.
Support other common immo modules

Note:Compatible with Xhorse solder-free adapters and cables

7. Read & Write EEPROM
Support EEPROM and FLASH

8. Read & Write Vehicle Dashboard
Support dashboard of For V.W, For Honda, For Hyundai, For Kia, etc.


Xhorse Multi-Prog E/CU and TC/U List: (Keep Updating)

E/CU (Ben-ch Mode):

For V-A-G 
1. SIMOS PCR2.1, EDC17c64
2. BO-SCH: MG1CA811
3. BO-SCH: MED17.1.6, MED17.1.21, MED17.1.61, MED17.5, MED1 7.5.1, MED1 7.5.2, MED1 7.5.5_TC1 766, MED1 7.5.5_TC1 767, MED1 7.5.20, MED1 7.5.21, MED1 7.5.25
4. BO-SCH: EDC17C46, EDC17C74, EDC17CP24, EDC17CP44, EDC17CP54, EDC17U01, EDC17U05
5. BO-SCH: MG1CS002一SPC5777, MD1 CP014_TC298TP, MG1 CS001_SPC5777, MG1 CS011 _SPC5777, MG1CS002_TC298TP, MD1 CP004_TC298TP, MD1 CP004一SPC5777, MG1 CS111 一SPC5777, MD1 CS004_TC298TP, MG1 CS008_SPC5777, MG1CS008_TC298TP
6. CONTINENTAL: SIMOS8.3x, SIMOS8.4x, SIMOS8.5x, SIMOS8.6X

For BMW
1. CONTINENTAL: MSD80, MSV80, MSD81, MSD85, MSD87, MSV90 
2. BO-SCH: MD1CP002_SPC5777, MG1 CS003_SPC5777 (B48, B58), MG1 CS201 _TC298TP (B38, B48, B58), MD1CS001_TC298TP, MG1 CS024_TC298TP(B48, B58), MD1CP032_TC299
3. BO-SCH: EDC1 7CP09_Fxx_TC1 796, EDC1 7C50_Exx, EDC1 7CP45_Exx, EDC17C06, EDC17C56
4. BO-SCH: MEI 7.2.1
5. BO-SCH: MEVD1 7.2.3, MEVD1 7.2_Fxx, MEVD1 7.2.4_Fxx(N20), MEVD1 7.2.6_Fxx, MEVD17.2.9_Exx, MEVD17.2.G, MEVD17.2.G (N55), MEVD17.2.H, MEVD1 7.2.6_Fxx, MEVD17.2.P_Fxx, MEVD17.2.K 
6. OSCH: MEV17.2_TC1766, MEV1 7.2_TC1 767, MEV17.2_TC1796, MEV1 7.2.1

For Mercedes Benz
1. CONTINENTAL: SIM271 DE, SIM271 KE
2. BOS-CH: MEI 7.7, MED17.7.3.1, MED1 7.7.1, MED1 7.7.2, MED1 7.7.3, ME1 7.7.8
3. BOS-CH: EDC17CP10, EDC17CP57, EDC17CP46, EDC17CP60
4. BOS-CH: CRD3x.x_TC1793, CRD3x.x_TC1 797
5. BOS-CH: MD1CP001-SPC5777, MG1 CP002_SPC5777, MD1CS006_TC298TP

For GM
1. DELPHI: DCM3.7AP
2. DELCO: E37, E38, E39, E39A, E67, E78, E80, E82, E83, E83A, E83B, E84, E87, E92, E98

For Nissan
1. DENSO: 23740-3Nxxx_Gen1 SH72531
2. BO*SCH:EDC17C84

For Hyundai/For Kia
1. BOS-CH: ME17.9.11, MEI 7.9.11.1
2. BOS-CH:EDC17C53
3. BOS-CH: MEG17.9.1 2_E/CU

For Ford
1. BOS-CH: EDC17C70, EDC17CP65
2. BOS-CH: ME17.0.3, ME17.8.5

For Volvo 
BOS-CH: EDC17CP48, EDC1 7CP48_ver2, EDC1 7CP22

Other
1. AM_ME1 7.8.5,DOO_ME17.8.5
2. BOS-CH: MG1CA007, MEI 7.8.8_TC1728, ME1 7.8.8_TC1 728_HW2, ME17.8.8_TC1 767, ME1 7.8.31, ME1 7.9.52
3. BOS-CH: EDC1 7C55, EDC1 7C1 0, EDC1 7C1 0_TC1 796, EDC1 7C1 0_TC1 797, EDC1 7CP42, EDC1 7CP14, EDC17c81
4. BOS-CH: MEVD1 7.8.4
5. BOS-CH: MED17.8.1 0_TC1 728, MED17.8.1 0_TC1 728_Hw2, MED1 7.8.1 0_TC1 767
6. BOS-CH: MD1 CS01 8, MG1 CS026_SPC58, MG1 CS032, MG1CS163, MD1CS01 2, MD1CS089, MD1CS069, MD1CS005_TC298TP, MG1 CS01 5_TC277TP, MG1 CS01 6_TC275TP, MG1CS01 7_TC277TP, MG1CS01 8, MG1CS019, MG1CS088
7. CONTINENTAL: SID208, SID209, SID211, SID807EVO ⑧ DENSO: KH, ZY, SH70xx_275xxx-xxx

For E/CU (Boot Mode):

For V.W series
1. SIMOS PCR2.1, EDC17c64
2. BOS-CH: MED17.1.6, MED17.1.21, MED1 7.1.61, MED17.5, MED1 7.5.1, MED1 7.5.2, MED17.5.5_TC1 766, MED1 7.5.5_TC1 767, MED1 7.5.20, MED1 7.5.21, MED1 7.5.25
3. BOS-CH: EDC1 7C46, EDC1 7C74, EDC1 7CP24, EDC1 7CP44, EDC1 7CP54, EDC17U01, EDC17U05
4. BOS-CH: SIMOS8.3X, SIMOS8.4x, SIMOS8.5x, SIMOS8.6X

For BMW series
1. CONTINENTAL: MSD80, MSV80, MSD81, MSD85, MSD87, MSV90
2. BOS-CH: EDC1 7CP09_Fxx_TC1 796, EDC1 7C50_Exx, EDC17CP45_Exx, EDC17C06, EDC17C56
3. BOS-CH: ME1 7.2.1
4. BOS-CH: MEVD1 7.2.3.MEVD17.2_Fxx, MEVD1 7.2.4_Fxx(N20), MEVD1 7.2.6_Fxx, MEVD1 7.2.9_Exx, MEVD17.2.G, MEVD17.2.G(N55), MEVD17.2.H, MEVD1 7.2.6_Fxx, MEVD1 7.2.P_Fxx, MEVD1 7.2.K
5. BOS-CH: MEV17.2_TC1766, MEV1 7.2_TC1 767, MEV17.2_TC1796, MEV1 7.2.1

For Mercedes Benz series
1. CONTINENTAL: SIM271 DE,SIM271 KE
2. BOS*CH: ME17.7, MED17.7.3.1, MED17.7.1, MED1 7.7.2, MED1 7.7.3, ME17.7.8
3. BOS*CH: EDC17CP10, EDC17CP57, EDC17CP46, EDC17CP60
4. DELPHI: CRD2.x_MPC556x

For Nissan series
BOS-CH: EDC17C84

For GM series
1. DELPHI: MT80.MT80.1
2. DELCO: E37, E38, E39, E39A, E67, E78, E80, E82, E83, E83A, E83B, E84, E87, E92, E98

For Hyundai/For Kia series
1. DELPHI: MT86
2. DELCO: DCM6.2AP

Other
1. CONTINENTAL: SID208, SID209, SID211, SID807EVO, SID310
2. SDI21.1 ,SDI21.2,SDI21.3
3. BO-SCH: ME1 7.3.0
4. MARELLI: 8DF, MM10JA

T-CU (Bench Mode):

For V-W
DL382, VL381, DL501 Genl, DL501 Gen2, DQ200Dxx, DQ200-G2, DQ200-G2_PQ, DQ200-MQB, DQ250-MQB, DQ250

For Exx/Fxx BMW series
GETRAG DKG 436 Genl, GETRAG DKG 436 Gen2

For Mercedes Benz series
VGS-FDCT, VGS2-FCVT, VGS2-FDCT

For Ford series
1. ETRAG MPS6GETRAG
2. DPS6, DC4

T-CU (Boot Mode)

For Ford series
DPS6, DC4

Other
ZF 9HP

 

Xhorse Multi-Prog Software Display:

Xhorse Multi-Prog Software
Xhorse Multi-Prog Software
Xhorse Multi-Prog Software


Xhorse Multi-Prog Hardware Display:
Xhorse Multi-Prog Hardware Display


 
Product Specifications:
 
Operating system: Linux
Processor: ZYNQ7020 Dual-core Cortex A9 +FPGA
Memory: 256M* 2 DDR+64M NOR FLASH
Display: 3.5-inch
Input voltage: 15V/4A
Working current: 300mA(14V)
Working temperatures: -20-50℃
Storage temperatures: -30-65℃
External interface: USB/RJ45
Dimensions: 233*150*54mm

Supported E/CU and T/CU models:













Package Includes:

1pc x Multi-PROG

1pc x USB Cable

1pc x Power Adapter (15V 4A)

1pc x 220V Power Cord

1pc x VH13 Interface Adapter Board

1pc x VH20 Interface Adapter Board

1pc x VH23 Interface Adapter Board

1pc x M-CU Adapter Multi-PROG Solder Cable

1pc x M-CU DB15 Adapter Cable

1pc x E-CU Adapter Multi-PROG Solder Cable

1pc x E-CU DB15 Adapter Cable

1pc x Multi-PROG OBD Cable

1pc x USB WIFI Network Card

1pc x Product Manual

1pc x Certificate Of Conformity

43pcs x E-CU Cable Plugs


If you have any questions,please contact us via Ebay message . We have always been doing our best to provide the best service .

Due to high volume of daily incoming emails and time zone difference, We will responde you within 24 hours.

Please contact us to resolve the issue before leaving negative feedback or low detail seller ratings.Thanks!
About Us

If you have any questions,please contact us via Ebay message . We have always been doing our best to provide the best service .

Due to high volume of daily incoming emails and time zone difference, We will responde you within 24 hours.

Please contact us to resolve the issue before leaving negative feedback or low detail seller ratings.Thanks!