Universal 12V Car Battery Isolator Disconnect Cut Wireless Master Switch With 1Pcs Wireless Remote Control
Add our listing to Watchlist Or Add to Cart , you will get more discount
1.This is a More Convenient Car Battery Disconnect Switch System that can remotely master kill your car power system,A Proper maintenance will extend and protect the battery and engine life,If the car battery falls below the shut off voltage, it will disconnect the battery automatically and further consumption is stopped.
2.It does not need to be removed the green button under normal use of the remote control.Connected to the Battery Negative Column 15-17mm,(loose is power off, tightening can be conductive,power off only need to turn the switch (green) loose 2-3 laps on the whole vehicle power off, power on the switch properly tightened,This function is applicable when there is no remote control.).
3.Remote operation,Comparing to tranditional battery switch, this Remote Control Wireless Battery Switch Disconnect allows you to move the trigger from under the hood to your hand so that you no need to frequently pick up the hood.
4.The Voltmeter has easy to read LED segments and connect to your 12 volt system,The state of your battery between full charged and discharged,Real time monitoring battery of vehicles, remind you of charge or replacement in time, better avoid emergent dead battery at starting car engine!
5.Come with 1pcs 320 Feet New Style Remote Control.You can even control it in your house,One button control on your dash for the whole car power system, Remote Receiver Standby Current is very low (0.003A),Universal for DC 12V Camper Trailer SUV Van Small Truck Agricultural Vehicle Trike Auto Off Road.
Installation Warning:
The product can not be installed and used in the state of battery depleted.
If the battery is depleted, please install this product after charging, otherwise the product may be burned out.
Features:
Power on and keep it for more than 2 minutes. The display voltage is the battery voltage power off state or The number displayed in the power supply for 2 minutes is not used as the voltage basis.
The remote control can directly operate the power supply and disconnection. The power-on state also has the battery low-voltage automatic power-off protection function \(automatic power-off to avoid continuing to consume when the battery is low), Press the remote Power-off button (B) after the automatic power-off. and then Press the power button (A) at This time, The device can remain powered for 20 seconds, during which time the vehicle can be automatically powered back on.
Under the green button, the insulation pad is removed and tightened to achieve permanent power supply.(It does not need to be removed the green button under normal use of the remote control.When using
the hand control, the remote control should be in the power-off state. When the remote control is also used, the hand control also should be in the power-off state.)
package included:
1PC Car Battery Isolator
1pcs remote control（The style of the remote control is sent randomly ）
1 Set Installation accessories
