Features:
*14-in-1 Air Quality Monitor Accurately detects
Time, Date, Alarm, Timer, Stopwatch, Timer, PM2.5, PM1.0, PM10, TVOC, Formaldehyde, HCHO, Temp.
TVOC, Formaldehyde, HCHO, Temperature, Humidity
*Gas concentration is classified into 3 levels - Green (Safe), Orange (Unhealthy), Red (Unhealthy). When the gas concentration exceeds the set alarm value (Alarm Value: Orange), it will sound an alarm to aler t people.
*The air monitor is powered by the supplied Type-C charging cable, it can work for 2 hours after a full charge, please keep it connected to the power supply during daily use.
*Built-in Battery: Equipped with 2000mAh high-capacity rechargeable battery, low power consumption and long endurance, no need to replace the battery frequently.
*Wide Application: Lightweight and portable, it is suitable for home, office, school, warehouse, agricultural planting, etc. No need to calibrate at startup, automatic monitoring.
*Doodle Smart APP can monitor the data in real time, you can view the historical data 3Each time after connecting to the Doodle Smart APP, the time and date will be automatically synchronised with the mobile phone update
*for for Tuya APP WIFI connection:
1. Within 2 minutes of switching on the device, the WIFI symbol keeps flashing fast to indicate that it is in pairing connection, at this time, open the Graffiti APP to add the device, you can connect to this device.
2. Or press the key 5 times continuously, then the WIFI symbol will flash continuously, release the current binding to re-enter the pairing mode.
3. WIFI symbol slow flashing means not connected to pairing WIFI symbol does not flash means connected to pairing successful
*Vertical time display:
1. Above the graph: year, month, day, week
2.In the middle of the picture is 12-hour time, which will be synchronised with your mobile phone automatically after linking to Graffiti APP.
3. 2 alarms at the bottom of the picture, you can set the alarm time (12-hour ) on Graffiti APP.
*Vertical stopwatch display:
1. When vertical screen display, press the key 3 times continuously to enter the stopwatch timing display mode
2. Top right of the middle 000, countdown timer minutes in unit, you can set the timer time on Graffiti APP. Press the key once to start the countdown, it will automatically alarm for 30 seconds when it reaches the set time, or press the key 2 times continuously to cancel the alarm in the middle. Press once to pause this countdown, press 2 times continuously to cancel this countdown.
3.If the countdown time is not set, press the key once, then the positive timer will start, press the key once to pause this countdown, press the key 2 times to cancel this countdown
4 .Press the key 3 times consecutively to exit the stopwatch timing mode and return to the vertical time display mode
Specifications:
*13-in-1 Function:
1. Key long 3 seconds auto power on
2.60 seconds auto counting
3.PM2.5 data greater than 100 will alarm, 4 sound
4. data greater than 50 alarm 1 sound: greater than 100 alarm 2 sounds;
>200 alarms Alarm 3 sound
5. Press the button 2 times in a row to close the alarm.
6. Press the key once to switch between Fahrenheit and Celsius
*Colour TFT display screen size ：2.8 inch
* Detection Ranges: 400-6000PPM, ±50±10%PPM
* Detection Accuracy: 1PPM
*TVOC Detection Ranges: 0-2.0mg/m3
*HCHO Detection Ranges: 0-0.6mg/m3
*PM2.5 Detection Ranges: 0-1000ug/m3, ±10%
*PM2.5 Detection Accuracy: 1ug/m3
*PM1.0 Detection Ranges: 0-1000ug/m3
*PM10 Detection Ranges: 0-1000ug/m3
*Temperature Detection Ranges: -10-50℃, ±2℃
*Humidity Detection Ranges: 0-99%RH, ±3%RH
*Input Voltage: 5V, 1A
*Battery: Built-in 3.7V, 2000mAh Lithium Battery
*Current: 150mA
*Power: 0.6W
Package Included:
1 * Air Quality Monitor
1 * USB Cable
1 * Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
