Stainless Steel Paintball gun air cylinder Charging Kit - fits dive cylinders with 232 and 300 Bar valves 

•  Stainless steel gauge block so no chrome plating to flake off.

•  600mm hose slightly longer than others, stainless spring protection to help prevent damage & abrasion . 

• The stainless steel assembly has a bleed screw for gentle relief of the pressure after filling.

• The 8mm Female Fosters Quick Coupler attached to hose to connect to cylinder fill nipple

• Supplied with 400 Bar Dial Gauge, luminous in low light.

• Supplied with spare DIN O ring, seal and bleed seal

• The DIN (G5/8) fitting will fit both 300 and 232 Bar DIN diving cylinders.

• The assembly is depressurised gently by means of a large knurled thumb screw.

• For your safety each hose assembly is pressure tested in the UK

Other designs may have a push button bleed, which often sticks open, especially if supply cylinder has not been closed fully.

NOTES: 

The cylinder and filling probes are for illustration, and not included. 

Modern cylinder valves have a removable insert to allow the DIN screw in fitting to be used.

This DIN screw in system is regarded as more secure than the old A clamp system.

300 Bar air cylinders only use the DIN system