Description:

This product is a photovoltaic controller that can quickly store the energy generated by the solar panel to the battery and provide reasonable power supply to the device. Widely used in various small solar power generation s such as landscapes and lighting.

Features:

1.Build-in industrial micro controller.

2.LED display,showing working status.

3.Full 4-stage PWM charge management.

4.Buil-in short-circuit protection,open-cirouit protection,reverse,over-load protection.

5.Dual mosfet Reverse current protection,low heat production.

Specifications:

Bat voltage: 12v/24V auto adapt

Charge current: 10A/ 20A/ 30A /40A /50A

Discharge current: 10A /10A /10A /10A /15A

Max Solarinput: 12V battery with 18V, 24V batterywith 36V.

Selif-consume: <10mA

Operating temperature: -35-+85℃

Color: Blue

Instructions:

Open the top cover of solar controller, connecting according to the graphic on the cover.

1. Connect the “+” and “-” of the battery correctly to the corresponding terminals of the controller (3rd and 4th terminals from the left).

The load indicator (flash) flashes and lights up after 15-30 seconds, indicating that the connection is correct and the following connections can continue. If not it may damage the controller.

2. Connect the “+” and “-” of the solar panel to the corresponding terminals of the controller (1st and 2nd terminals from the left).

3. Connect the “+” and “-” of the load to the corresponding terminals of the controller (5th and 6th terminals from the left).

4. The charging indicator is bright all the time, indicating that it is charging strongly; flashing indicates that it is floating charging; when it is off, charging is stopped.

5. When the load indicator is bright all the time, it indicates that there is output, the load can work; if it is off, there is no output, and the load cannot work.

Notice:

1.This controller is 12V/24V(select 18V/36V),When installing this device for the first time,please make sure that the battery has enough voltage so that the controller can recognize the correct battery type.

2.The battery cable should be as short as possible to minimi ze loss.

3.This controller is only suitable for all kinds of -acid batteries(including openings,seals,colloids,etc.)and lithium batteries.

4. The acid battery or lithium battery must be set before the hardware switch.

5. The charge regulator is only suitable for,regulating solar modules Never connect another charging source to the charge regulator.

Package Included:

1 * Solar controller unit

1 * User manual

We accept payment via Paypal only.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to UK; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.