Feature:

1. Comfortable Heating: Moxa purifier using far infrared and graphene heating, with mild heat and strong osmotic force, combined with moxibustion paste, suitable for heating important acupoints and meridians.
2. Remove Fatigue: Graphene heating allows moxibustion paste to act on deep skin, gentle maintenance, effectively enhancing immunity, relieve fatigue and soreness.
3. Enhance Circulation: Moxibustion box can enhance local circulation and lymphatic circulation, promote the dissipation and absorption of inflammation, adhesion, dispersion, and hematoma.
4. 3 Gears: Smokeless moxa box with 3 gears for you to choose, with different time and temperature, which can relieve arthritis, neck, shoulder, wrist, knee pain, etc.
5. Easy Operation: Electric moxibustion box adopted magnetic absorption charging bin charging and storage, compact and portable, which is easy and convenient for you to use.

Specification:

Item Type: Electric Moxa Purifier
Material: ABS
Battery Capacity: 250mAh
Battery Type: 3 x Lithium Ion Battery (Included)
Rated Voltage: 3.7V
Applicable Symptoms: Sitting for a long time, lowering the head to play mobile phone, bending over the desk, so that the cervical spine is in a state of passive stretching for a long time, resulting in excessive tension of the neck muscles (1. Long term bow to play mobile phone stiff neck 2. Stay up late and work overtime cervical pain 3. Lying down watching drama/playing games neck fatigue 4. Driving for a long time, shoulder and neck swelling pain 5. Doing housework for a long time, back pain 6. Working pressure, insomnia, dreams)
Suitable Parts: Suitable for various parts of the body, shoulder, neck, leg, abdomen, arm.
Gear:
1 Gear: Indicator color: blue, Operating time: 20 minutes, Temperature: low temperature
2 Gear: Indicator color: green, Operating time: 20 minutes, Temperature: medium temperature
3 Gear: Indicator color: red, Operating time: 15 minutes, Temperature: high temperature

How to Use:
Steps for using moxibustion box:
1. Wipe the acupoints around the hot strip;
2. Tear off the double sided adhesive rings affixed with the paste;
3. Glue the metal thermal conductive sheet of the product to the rubber rings (press hard to ensure that the paste is firm);
4. Tear off the two layers of protective paper at the bottom of the paste;
5. Stick the metal thermal conductive sheet and paste on the required acupoints (press the paste around to ensure that the paste is firm)
6. Long press the button on the top of the product for 2 seconds to start up.
7. Select the right gear to start moxibustion (click the button to adjust the gear after starting up, a total of three gears)
8. The product will automatically shut down when it reaches the agreed time, or press the button for 2 seconds to shut down.
9. After use, please remove the double sided tape on the metal thermal conductive sheet to avoid sticking when putting it back in the charging box.

Charging:
1. The product is charged by USB cable. When the power is insufficient, it takes about 2 hours to charge to saturation, and can be used continuously for about 3 times.
2. When the product is used after idle for a long time, it needs to enter the charging state. At the same time, the indicator light is red on, and the red indicator light is off when the charge is saturated.
3. When charging, the product should be properly placed in the charging box, plug in the charging cable, and the indicator light on is regarded as normal charging;
4. Because this product can be charged for a single or multiple hosts at the same time, the charging time of each moxibustion head will be slightly different, so the length of time when the moxibustion head shows the blue indicator light is inconsistent, which is a normal.

Package List:

3 x Moxibustion Purifier

1 x Storage Charging Bin

1 x Charging Line

10x Moxibustion Stickers

Note:

1. Pay attention to the adjustment of moxibustion gear: it is recommended to use it from a low level, and then adjust the appropriate gear according to the temperature of the moxibustion site; 2. The time of each hot strip is subject to the time of the hot strip meter (20min/15min). After the heating of the product stops, the hot moxibustion meter must be removed first and the surfaces of the thermal conductive plate of the hot moxibustion meter must be cleaned, and then it is advisable to stick the hot moxibustion device for 15‑60min. 3. If there is sweat, water or grease on the body, please wipe it before using it to prevent the sticking degree of the paste is not enough. 4. If you need to move or remove the product, please shut it down before operation. 5. Do not touch cold water, wash hands or take a bath within half an hour after heating the bar. 6. After the hot strip process or hot moxibustion, it is necessary to drink more warm water than usual (not cold). 7. The product has a heating function, and there is a little difference in the temperature perception of each skin, which may be felt. 8. Consult a doctor before use for those with sensitive skin. 9. Do not rinse the product directly with water or soak it in water. Do not touch corrosive liquid. 10. After experiencing the product, if there are small bubbles, it proves that the moisture in the body is relatively heavy, which is a normal human manifestation and will disappear by itself after a period of time; If you feel unwell for a long time, consult your doctor. 11. Do not disassemble, repair or modify the product without permission, otherwise accidents may occur. 12. It is forbidden to be used by patients with skin sensation disorder or insensitive to heat. 13, the product has no waterproof function, please do not wash. 14. This product is not a iatrical device and has no therapeutic function. Not as a basis for diagnosis.