Survive the Coffee Machine Apocalypse with Our Ultimate Breville Oracle Survival Kit!

Whether it's a faulty pump, a buzzing solenoid, or a leaky seal, this kit allows you to fix all the common faults these machines suffer from.

Compatible with all Oracle models including 240v and 120v.


Some of the problems this kit will fix are:
  • Lack of Froth in Milk
  • Loss of preinfusion
  • Buzzing Solenoid
  • Weak Pressure on Coffee or Steam pumps
  • Leaking Seals
  • Overheating / Underheating
  • Coffee, Steam or hot water solenoid stuck open / closed
  • 3 beeps of death



ORING SERVICE KIT

12x Small o-rings for hose connectors (water/steam) and NTC probes.

5x Large o-rings for thermal and water level probes.

3x Tiny o-rings for water level probes

1x 10g tube of Food Grade Silicone Grease

1x Group Head Gasket/Seal




SOLENOID SERVICE KIT
Replacement (Brand new Genuine OLAB made) solenoid core and orings** for Oracles with OLAB branded coffee solenoids or venturi solenoids.
This will resolve buzzing / most dispensing issues. Plus air/steam issues due to faulty venturi valves
** It's recommended to use existing Breville washers/pins instead of supplied type if condition is fine.



TRIAC REPAIR KIT
3x Replacement Triacs plus 1x Opto Isolator to repair 99% of Traic Board faults on the Breville Oracle.
If your machine is has developed a heating problem caused by leaking orings or maybe the solenoid is stuck on, then this kit will save you money on a new board.
This kit includes a triac for the steam or coffee circuit and the group head circuit

These components will work on both 240v and 120v versions. 


PUMP SERVICE KIT
Fixes weak pressure or loss of pre-infusion on the Coffee Pump (EP5 / EFP5 & Post 2021 EFM) and Steam Pumps (NMEHP)
1x pump valve ball
1x Coffee pump piston oring
1x Steam pump piston oring
https://www.youtube.com/watch?v=Gcuq22CC5kc


AIR PUMP SERVICE KIT
Most common reason for lack of froth (after blocked tip)
1x Air Pump


STEAM + COFFEE/GROUP BOILER THERMAL FUSES
Should the worst happen, then this will get you back on track. You'll get both types of fuses to cover any of the thermal fuses in the machine. There is also a steam boiler thermal switch as you'll likely need this if your machine has the 3 beeps of death.


REPLACEMENT LID LATCH
Over time the top access panel latch can wear out or break off. We have you covered too with an easy to fit replacement.


CABLE MANAGEMENT KIT
Includes all the connectors you'll need to carry out any of the repairs

Thanks


For more info, please check out this channel on Youtube:
https://www.youtube.com/@BrevTech