I have used this Emotiva amp for a few years in my home cinema setup to drive the 6 height channel speakers. It has always performed very nicely, very good clear sound, no hum or buzz, no thump when the amp turns on. It runs very cool even after a couple movies in a row it will hardly get warm, i have never heard the fans inside the unit. 

Included is everything you see pictured, the amp, the manual, the trigger cable, original power cable, and all original packaging with double box as it came new. 


Postage on this item is INCLUDED IN THE BUY IT NOW PRICE, and will be sent using Sendle unless the buyer specifically wishes to pay for something else, it is quite heavy and will cost a fair amount to post. Offers may not include the free postage unless agreed prior. Local pickup may be offered by appointment only. I will not ship overseas.

Ask any questions, i will return your message as quick as i can :)

The following specs are direct from the Emotiva website:

The BasX A700 is a seven channel power amplifier. The BasX A700 combines classical audiophile amplifier architecture, based on a heavy-duty linear power supply, and a carefully designed high current short signal path Class A/B output stage, with advanced microprocessor-controlled monitoring and protection circuitry, to deliver superb sound quality at a truly reasonable price.

Audio Specifications

Power Output (ALL channels driven):

• 90 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms

• 125 watts RMS per channel; 1 kHz; THD < 1%; into 4 Ohms

Power Output (two channels driven):

• 120 watts RMS per channel; into 8 Ohms

• 175 watts RMS per channel; into 4 Ohms

Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.02 dB)

Broad Band Frequency Response: 10 Hz to 80 kHz +0/-1.8 dB

THD + noise: < 0.02% (A-weighted); ref rated power

Signal to Noise Ratio (8 Ohm load):
> 115 dB; ref rated power; (A-weighted).

Minimum Recommended Load Impedance (per channel): 4 Ohms (equals one 4 Ohm load or two paralleled 8 Ohm loads)

Damping Factor (8 Ohm load): > 500

Input Sensitivity (for rated power; 8 Ohm load): 1.2 V

Gain: 29 dB

Input Impedance: 27 kOhms

Input And Output Connections

Input Connections: Unbalanced (RCA); one each per channel

Speaker Output Connections: Audiophile grade 5-way binding posts

Trigger:

• Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.
• Trigger Output: 12 VDC; can drive any load up to 120 mA.

Power Requirements

115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected)

Front Panel Controls and Indicators

• Standby: push button

• Status LEDs: one per channel; blue

• Status LEDs change to red to indicate a fault condition

• Standby LED: amber

Rear Panel Controls

AC Power switch: rocker switch (switches AC main power)

Status LEDs switch: disables front panel Status LEDs

Protection

The BasX A700 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.

Mechanical

Dimensions:

• 17” wide x 4” high x 15-1/2” deep (not including connectors)

• 21-1/2” wide x 8” high x 21” deep (boxed)

Weight:

• 30 lbs (unboxed)

• 36 lbs (boxed)