-Toro TS120 High performance electronic speed controller with alloy case and fan for 1/10 racing applications with 2-3s LiPo e.g. buggy/touring car racing on carpet/astro. New in box. Requires soldering, cables included.

-Ares competition motor 6.5T with (short) sensor lead. 2s LiPo max. Adjustable timing, dual sensor port, fully rebuildable.

-SkyRC program card is included.


Important: Soldering must be carried out carefully, with a sufficiently powerful iron to avoid prolonged heating and damage.
Tin tabs and wires, then leave to cool. If using an Iron no greater than 60w, solder one or two tabs at a time and allow to cool before completing, to prevent heat build-up. When soldering together, heat the tabs through the wire, heating the wire first not the other way around.

Motors must be geared and timed correctly according to temperature, keep under max 65c.




Features :
【High Performance】:Users could set the turbo and boosting timing which can improve the motor RPM to get its best performance.
【High Precision】:Well-performed throttle and brake control function could control the punch/brake rate by point and the point can be set by user. The precision of the punch/brake rate is 1%.And the user could also custom the throttle/brake curve.
Punch control is reasonable and precise and it can meet different customers' request for line and power.
【Stable Operation】: Red copper connector is used internal of the ESC. It can decrease the internal resistance at high current situation and the thermal resistance.
The circuit is managed by intelligent thermal management kernel algorithm which can improve driving skill and adjust the control time of the dead band. The dynamic loss can be reduced effectively when the motor is running at high speed or the user changes the motor speed frenquently so that the motor can be more stable when running.
【Effectively】:The internal resistance can be reduced by laminated copper stack control technology and cooling fan design so that the dynamic thermal equilibrium can be got. In this case, the heatsink can works effectively.
【Electronic Switch is Built-in】:The electronic switch is built in so that it could save space. And the electronic switch is more sensitive and reliable.
【10 sets Data】:The user could set and store 10 sets of profiles in the ESC. These data could be called out at any time without any special program setting. All the setting can be exported or imported so that the user could compare and analyze.
【Safety features】:w voltage protection, motor and ESC overheat protection and signal lost protection.

Descriptions:
Thank you for purchasing TORO 1/10 ESC. Please read the Instruction Manual thoroughly before you use the product. These operating instructions are designed to ensure that you quickly become familiar with its features and functions and make full use of this product.
It can be programmed by Program Box(SK-300046), PC via SKYLINK(SK-600013) or smart phone via Bluetooth Module(SK-600058).[Optional]
The firmware can be updated by connecting the ESC with PC or smart phone.
It can be off by keeping the trigger to full brake for 8 seconds when running.