Pcie 2x SATA 6G. Harware Raid 1. Mirroring Copy of A Disk Existing For Raid
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
PCIe Controller Card
Sata 3.0
2 PORTS - Raid
AUTOMATIC MIRRORING
Professional range:
The components of the Pro range offer above average quality and performance, for demanding enthusiasts and professionals.
In addition to their design and finish qualities, these cards offer the particularity of having drivers pre-installed in their Bios chip, so they are recognized and installed automatically by your PC or MAC without having to use a driver CD. or by downloading from the internet (see description below, the pre-installed drivers may vary depending on the model)!.
|
Features :
- PCIe card 2 ports Sata 3 6Gbps on port 2x (compatible 2x, 4x, 8x and 16x). ASM1062R chipset.
- Allows you to create a Raid 1 cluster FROM AN EXISTING DISK, by creating its mirror copy!!!.
- PCI Express 2.0 (compatible with 1.0 but performance will then be lower for reasons of lower bandwidth).
- Automatic mirroring preserving the contents of an existing disk, including the operating system.
- Meets Sata 3.0 specifications.
- Support Sata 1, 2 and 3 1.5Gbps, 3Gbps, 6Gbps transfer rates.
- Compatible with hard drives, SSDs, optical drives and Bluray in Sata 1/2/3.
- ATA and ATAPI compatible.
- Native Command Queuing (NCQ) compatible.
- Clean BIOS (accessible by the Ctrl-R combination at boot) to configure and monitor the Raid .
- Ability to create the cluster directly without going through the Bios by positioning jumpers on the card.
- Low Profile format (supplied with two brackets, high profile mounted on the board and low profile supplied in the box).
- Hot Plug compatible (hot mounting of Sata ).
- Connection plug for activity diode of your box.
- Pre-installed drivers for Windows 10, 8, 7, Vista, 2008, 2012, Linux, Mac OS 10.x and newer. Supplied on CD for XP.
- Autonomous bios that supports booting on Windows or Linux.
- RoHS components.
Features:
- 6Gbps Sata III 2 Port PCIe Gen2 1 Lane Host Adapter.
- Mirroring Existing Disk 6Gbps Sata III PCIe RAID1 Adapter.
- 2Ports 7-Pin Sata for 2-Drive Hardware RAID1 SSDs or HDDs.
- Supports RAID1 Mirroring to preserve Existing OS Disk or Data Disk.
- File content of existing drive is active and usable.
- Fully compliant with Serial ATA specifications 3.0.
- Supports Native Command Queue (NCQ).
- Hardware Raid adapter board to support Windows , no driver required.
- Provides BIOS Configuration Utility & Windows GUI to configure and monitor RAID1 status.
- Easy connect Existing Disk to “Primary” Sata 7-pin connector and mirror Disk to “2nd” Sata 7-pin connector.
- Fully RoHS compliant.
- ASM1062R chipset.
The components of the Pro range offer above average quality and performance, for demanding enthusiasts and professionals. In addition to their design and finish qualities, these cards offer the particularity of having drivers pre-installed in their Bios chip, so they are recognized and installed automatically by your PC or MAC without having to use a driver CD. or by downloading from the internet (see description below, the pre-installed drivers may vary depending on the model)!. Low Profile format (supplied with two brackets, high profile mounted on the board and low profile supplied in the box). Pre-installed drivers for Windows 10, 8, 7, Vista, 2008, 2012, Linux, Mac OS 10.x and newer. Supplied on CD for XP. Easy connect Existing Disk to “Primary” Sata 7-pin connector and mirror Disk to
The components of the Pro range offer above average quality and performance, for demanding enthusiasts and professionals. In addition to their design and finish qualities, these cards offer the particularity of having drivers pre-installed in their Bios chip, so they are recognized and installed automatically by your PC or MAC without having to use a driver CD. or by downloading from the internet (see description below, the pre-installed drivers may vary depending on the model)!. Low Profile format (supplied with two brackets, high profile mounted on the board and low profile supplied in the box). Pre-installed drivers for Windows 10, 8, 7, Vista, 2008, 2012, Linux, Mac OS 10.x and newer. Supplied on CD for XP. Easy connect Existing Disk to “Primary” Sata 7-pin connector and mirror Disk to
Niveaux RAID |
1 |
EAN |
3760277432955 |
Interfaces internes |
SATA III |
Marque |
KALEA-INFORMATIQUE |
Port compatible |
PCI |
Numéro de pièce fabricant |
Non applicable |
Nombre de ports |
2 Ports |
Type |
Carte de contrôleur RAID |
Interfaces externes |
SATA III |