2.2KW 4 Axis 6090 CNC Router Engraver Woodwork Drilling Milling Carving Machine
Note:this Engraver Doesn't Come with Uk Plug Adapter,Please Prepare It .If You Really Mind This ,Please Don't Order
Cnc 6090 Router 4axis+2.2kw Spindle Motor +Vfd +Usb Port Metal Wood Engraver with Tool Sensor
Sku:2200w-6090t1-Usb+2200w-6090t2-Usb+2200w-ts009usb
Package List:
1x Main Unit (Frame)
1x Main Unit (Working Base)
2x Fence Baffle
1x Control Box
1x a Axis
1x Sinal Cable for a Axis
1x Pump
1x Usb Cable
2x Cutter 2*6mm
2x Cutter 3*6mm
10x 4*7mm Round Head
6x 4*10mm Black Inner Six Angle Screw with Nut
8x 5*20mm Black Inner Six Angle Screw
4x 5*8mm Flat Philip's Head Screw with Nut and Gasket
8x 6*24mm Balck Flat Inner Six Angle Screw
12x Aluminium Fastener
1x 13-15# Wrench
1x 14-17# Wrench
2x Six Angle Wrench(3mm)
2x Six Angle Wrench(4mm)
1x Teflon Tape
2x Fuse (5a)
1x Power Cable
1x Manual
1x Tools Setting Auto-check Instrument for Cnc
Cnc Router Engraving Machine Parameters:
Model:cnc6090gz
Outside Dimension:1150x970x650mm(Lxwxh)
Working Platform Size:1045x720mm(Lxw)
Frame Material:the Whole Machine Used 6061 Aluminum Profiles
Max. Feeding Height:≤140mm(from Base of Z Axis to Platform)
X,Y,Z Working Area:600x900x150mm
Sliding Unit:
X Axis:sfu1605 Ball Screws;
Y Axis:sfu1605 Ball Screws;
Z Axis:sfu1204 Ball Screws
Drive Unit:
X Axis:ø20 High Intensity Round Rail,
Y Axis: Sbrø20 High-strength Aluminum Base Rails;
Z Axis: Ø12 High-strength Round Rail
Stepping Motor:two-phase 3a (with HandWheels)
Driving Power for Stepping Motor:ac220v,240w, Output Dc24v10a
Maximum Idle Speed:1500mm/M
Working Speed:50-1500mm/Min (Different Material with Different Speed Settings)
Spindle Motor:2200wHigh-speed Variable Frequency Spindle Motor, Er11 Chuck , Matching 6mm Bur
Variable-frequency Drive(Vfd):Ac220v, 2200w, 0-400hz(Built-in Control Box )
(Tips:1,the Spindle Motor Must Connect with the Vfd.2,It Cannot Directly Connect with the Supply Voltage (Ac220v).3,Please Don’t Change the Data Setting of the Vfd If You Are Not Professional Technicians, or It Might Damage the Spindle Motor.)
Drive of Stepping Motor 0-3.5a Adjustable Four-axis Drive(Tb6560ahqchip, 24v Power Supply, 2,4,8,16subdivisionSettings, Factory
Setting:8subdivided)
Repositioning Precision:≤0.05mm
Speed:0-24000r/M
Cooling Method:water Cooling,Matching Heat Dissipation Water Pump
Spindle Precision:radial Runout≤0.03mm
Carving Command:g Code/Tab File/Nc/Tab /Ncc/File
Protection:emergency Stop Button
Recommend Software:computer Has a Usb Port Output.
3. Place the Control Box in a Ventilated Dry Place Where There Is No Dust,No Moisture
4.Connecting the Control Box with the Cnc Machine and You Computer and Make Sure the Plug Will Not Come off.
5.Correctly Connect the Machine with the Controller. Don't Suspended the Cable Which Connect the Spindle Motor with Axis(X,Y,Z,a).Otherwise, It Will
Damage the Driver of the Controller.
6.Correctly Install the Spindle Motor and the Heat Pump. the Heat Pump Should Be Covered Completely in the Water, Then Turned on the Electric Current toCheck Whether the Water-cooling System Working Well.
7.Installing a Cnc Control Software and Drive Such As the Mach 3 or Emc2on Your Computer.
8.Following Our Manual or Guideline to Set the Software.
9. Before Turn on the Machine, Please Check All the Cable and Water- Cooling System to Make Sure They Are Working Fine.
10.You Can Enjoy Making You Dream with Using Our Cnc Machine Now.