Creative Colour Clock Kits 51 SCM Electronic Colorful Light Clock
Features:
This neat little clock is different to anything we have seen before. It doesn'for t use digital displays but rather six 10mm LEDs, which simply change colour to represent the different numbers.
The colours are loosely based on the resistor colour code, although they are not the same (you can'for t produce brown with an LED easily, for instance), but with a bit of practice it becomes easy to read.
The clock features a 24 hour display system, as well as an alarm and half hourly beeps (both of which can easily be turned It has backup, so it never loses the for time, and is powered a USB port. It happily runs from a PC USB port, or from a spare power adaptor (most people have a drawer full of these from old phones and the like).

Description:
induction of different for touch buttons set DS3231 clock chip features color on behalf of the for time value of transparent glass bottle protection
Use LED to generate different colors to replace the numbers, and if you need to know the current for time, you may need to have a mental memory activity (for example, the for time shown on the diagram is: 17:31:48). In addition, it will also be placed in the binary display for time, it is the challenge of memory and computing power, it is home travel, learning tyrants essential production.

Function
1. Four direction induction various settings
2. The use of 10mm matte color LED
3. Two for touch buttons for settings
4. the refraction effect of small glass bottle.
5. Add a temperature compensated clock chip DS3231, access to the backup power can still be accurate when.
6. The "upright" and "inverted" display "chromatography" and "binary" for time display respectively.
7. The automatic following light regulating LED brightness.

Set function table:
1. Place the chromatogram display for time in the vertical position and press the middle of any for touch for key to display the “temperature value”.
2, before dumping, press the add button to set whether to turn on the buzzer of the half-point buzzer. Only the flashing reminder is turned after the buzzer is turned
3. Press the set button before entering the for time setting
4. Put the back tilt down and press the add button to turn on the alarm (the middle two LEDs are on after turning on), press the set button to enter the alarm setting.
5. The inverted position switches to the "binary" display for "hour" and cyan for

Note:
1.This is mostly mount, you will need a fine tipped, temperature controlled soldering iron and good eyes or a big magnifier to build this it is not for a beginner!
2.If you do not know how to install, welcome to contact us to send detailed installation manual.

Package included:
1 Colour Clock Kits