USED 201-EDG-02B Exterior Load Scale

GAUGE IS A USED CUSTOMER RETURN. Picture is an example. May have dirt, scratches, scuffs, etc. Has been functionally tested and meets our original specs and works great! 60 day free return policy. Includes bracket and stainless mounting hardware.


Two air pressure sensors monitor either one dual height control valve axle group, or a dedicated tractor/trailer set with a total of two height control valves


Right Weigh's 201-EDG-02B Exterior Digital load scale is designed for monitoring two height control valves (HCV's). This can be either one axle group with dual HCV's, or a dedicated tractor-trailer set with one HCV each. When installed on a typical tractor-trailer with one HCV on the drive, and one HCV on the trailer, this gauge can display estimated steer, drive, trailer weight, and total weight. After both an empty and loaded calibration has been performed at a certified ground scale, the gauge will reliably display the on-the-ground axle group weight in pounds or kilograms. When properly calibrated and used, Right Weigh's on-board load scales are the most valuable tool available for maintaining safe and legal axle weights. 

Corresponding Installation Kits (NOT INCLUDED):
101-SK Covers the installation from the back of the load scale to an axle group’s air suspension system
301-QDK Provides the quick disconnect and air line needed when connecting a truck-mounted gauge to a trailer axle group

  • On-the-ground axle group weight is displayed in pounds or kilograms on a digital display
  • Uses 2 calibration points (both empty and loaded) for maximum accuracy at all weight points for all connected axle groups
  • Available PIN code can be activated to protect calibration from tampering
  • Overweight alert can be set which will blink the display if weight goes beyond your set limit
  • Installed in a weather resistant enclosure
  • Bracket and stainless mounting hardware include