Features:
*Mini shortwave automatic antenna tuner, Type-C charging port, OLED display.
*The antenna tuner is automatically tuned without any control wires and is suitable for most broadcasting stations.
*The device contains a set of 7 capacitors and 7 inductors, enabling it (with the maximum configuration) to work effectively in a wide frequency
overlapping with the amateur radio HF of 1.8-55MHz.
*Using metal shell, stable and reliable performance.
Specifications:
The display LED :0.96 inch
Working frequency: 1.8-55 MHz
Built-in 3.6V lithium battery :1350MA
USB charging current: 1A
Maximum working power: 100 watts
Maximum possible measured power: 150 watts
1 watt: It is necessary to start setting the minimum power
The smallest possible measured power: 0,1 watts
Measurement procedure with power up to 10W: 0, 1 watt
Hourly powerful measurement steps 10 watts above STI: 1 watt
Power measurement accuracy: 10%
Specified maximum inductance: 8,4 uH capacity
Minimum installation step length of inductance: 0.05μH
Maximum installation capacity: 1870 pF capacitor
Minimum installation step length: 10
illustrate:
1. Connect the radio-ATU antenna tuner-antenna
2. When using for the first time, please set the output power of the radio or power between 20-30W, warn that high-power tuning may easily damage the antenna tuner.
3. Set the radio mode, use FM mode
4. Select the antenna frequency to be used, use 20-30W power in FM mode, press the radio PPT, observe the ATU antenna tuner PWR and SWR
5. The use of ATU button TUNE: short press (less than 1 second) ATU button, it is in reset state, long press (more than 1 second) ATU button is in adjustment state
6. If the SWR display of the ATU antenna tuner is greater than 2.0 in the transmission state, it means that the antenna has been detuned. You need to use an antenna tuner. Press and hold the ATU button TUNE to tune and observe the SWR value. If the SWR is greater than 3.0 after tuning, the antenna will be detuned. Seriously, it is not recommended to use more than 30W power, and the transmission power should be controlled below 30W; if the tuning is completed, the SWR display is less than 2.0, and the maximum power of 100W can be used for transmission
Package Contents:
1 * Automatic antenna tuner
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.