SALE!.... QUICK, ONE ON OFFER AT £43 PCP Air Gun DIN Dive Bottle fill Adaptor 60cm Hose, 8mm QF Fosters 400 Bar Gauge | eBay
Stainless Steel PCP Air gun Charging Kit - fits air cylinders with 232 and 300 Bar valves
• Stainless steel gauge block so no chrome plating to flake off.
• 600mm hose slightly longer than others, stainless spring protection to help prevent damage & abrasion .
• The stainless steel assembly has a bleed screw for gentle relief of the pressure after filling.
• The 8mm Female Fosters Quick Coupler attached to hose to suit your probe, (no filling adaptor or probe supplied)
• Supplied with 400 Bar Dial Gauge, luminous in low light.
• Supplied with spare DIN O ring, seal and bleed seal
• The DIN (G5/8) fitting will fit both 300 and 232 Bar DIN diving cylinders.
• The assembly is depressurised gently by means of a large knurled thumb screw.
Other designs may have a push button bleed, which often sticks open, especially if supply cylinder has not been closed fully.
NOTES:
The dive bottle / cylinder is for illustration and not included.
Modern cylinder valves have a removable insert to allow the DIN screw in fitting to be used.
This DIN screw in system is regarded as more secure than the old A clamp system.
The 300 Bar air cylinders only use the DIN system