Atari 2600 JR Console only AV Modded Seller Reconditioned With controller                                     Lot3009 

Tested and working.
Comes with original rebuilt controller, and original power supply.

Some light scratches and scuffs from age and use.
Given the age, the console is in good shape. 
Some scratches to the aluminum band.
Please see pictures 6 & 7.
The upper part of the shell has a chip in the back corner I didn't see till the pictures.
Please see picture 15.
Had some damage to the vent on the bottom half of the shell.
I covered it over.
Please see picture 9.

The console has been cleaned inside and out. Made repairs where needed.
(Replaced 2200mf capacitor and filter capacitors related to power and signal.)

I have made a standard RCA audio video modification. 
I also replaced the membrane circuit for the reset and select switches.
I replaced them with micro buttons.
Please see pictures 16 & 17. 
Because of this mod I added another 30 days to the return policy.


Please note: Even with the RCA upgrade that it may not be compatible with your TV.
I have found that a stereo tube tv has the best picture with this upgrade.
Smart TVs are much more problematic when it comes to the picture quality.
You my need to adjust the picture. With some brands even that isn't enough.
Pictures 12 to 16. show this console working on a Insignia smart tv with a 1080p up scaler.
The picture is good.

Side Note. If you get an up scaler. Get a good one and not the cheap $10 Dollar ones. 
They are fine in a pinch. But they are not built for quality or to last. (Learned the hard way.🤕) 
You don't have to get the biggest and best. The next step up is a vast improvement.


Some general background.......


The consoles I sell have been given a full inspection and tested for proper color adjustment, voltage, & capacity. Repairs were made where needed.

All adjustments and voltage parameters are in accordance with the Atari VCS Domestic Field Service Manual.

Units cleaned inside and out.

Cleaned switches, controller ports, and pins.

Checked and corrected any cold solders and loose connections.

From there I correct the orange trim with a paint that has been color-matched.

Then reassemble and give it a good polish.


If I list a unit with an original controller: 

I disassemble, remove and clean contacts, then replace any worn-out pressure plates.

From there I correct the orange trim with a paint that has been color-matched.

Then reassemble and give it a good polish.


For games: 

I clean the contacts with either alcohol or a deoxidizing solution. (If I have to use sandpaper, I do not list it with a console.)

If cover art is loose I will glue it back the best I can.

Outside of cart is cleaned with a multipurpose cleaner.


Several man hours go into every Atari I Recondition.

I have been been a technician for the Air Force and in the private sector for over 12 years. I have experience working on Ataris as a hobby and for friends for 12 years, and selling them on eBay for over 10 years.

I'm saying this because I want you to buy with confidence that you are getting a good quality console. I guarantee my work with a 30-day return policy. Most will not make such offers. If there is an issue with the console you purchased, you can return it with in 30 days of receiving your console.

-Thank you

Please mouse over the pictures and determine condition.

I ship within 3 days of confirmed payment.

If you have any questions please ask.

All sales are final.


Please Note: No changing the address after purchase. If you are buying this as a gift. 
You will need to change the address before hand. I will not change the address that eBay has on file.
If you need to change the address. You will need to ask to cancel and try again.

If your purchase is lost or damaged in transit, please e-mail me before you open a case. Give me the opportunity to rectify the situation.-Thank you


Notice: International buyers outside the U.S.A.:

I am part of the Ebay global shipping program (GSP). I only use this program for sending overseas. I'm sorry but I do not ship otherwise. Thank you

Notice: International buyers outside the U.S.A. and Canada:

Please take into consideration that if you are buying a vintage video game console that there are other costs involved. You will most likely need a power adapter from 110v to 220v and to match whatever is your wall outlet configuration. Also, a NTSC To PAL SECAM converter. The RF signal is different with different regions. These are the most common issues. Just please keep this in mind before you buy...Thank you