4-Kanal-Infrarotdetektor-Tracking-Sensormodul-Set für Smart Car
Features: Paket enthalten: 1pcInfrared Tracking Modul Set
1. Dieses Modul bietet eine vielseitige Infrarot-Detektionssystemlösungen für Automationsgeräte wie Smart Cars, Roboter
2. Das Sensormodul ist an das Umgebungslicht anpassbar. Es hat ein Paar Infrarot-Sende- und Empfangsröhren.
3.Transitting Tube sendet eine bestimmte Frequenz IR aus, die beim Detektieren von Hindernissen (reflektierende Oberfläche) reflektiert und von Empfangsrohr empfangen wird.
4. Nach der Verarbeitung mit der Komparatorschaltung gibt die Signalausgangsschnittstelle ein digitales Signal (ein Signal mit niedrigem Spannungspegel) aus.
5.Wenn das Modul ein Hindernissignal erkennt, leuchtet die rote Anzeige auf und der OUT-Port gibt kontinuierlich niedrige Spannungspegel-Signale aus.
6.Detection Abstand kann mit Potentiometer eingestellt werden, im Uhrzeigersinn zu erhöhen und gegen den Uhrzeigersinn zu reduzieren.
7. Zielreflektivität und Form ist der Schlüsselpunkt der Erkennungsentfernung. Kleine und schwarze Objekte haben einen minimalen Erkennungsabstand, während große und weiße Objekte einen maximalen Abstand haben.
8.Output-Port kann direkt an den SCM IO-Port angeschlossen werden, kann auch ein 5V-Relais-Modul oder Summer-Modul direkt ansteuern.
9. Weit verbreitet in Roboter Hindernisvermeidung, Auto Hindernisvermeidung, Fließbandzählung und schwarz weiße Linie Tracking.
Spezifikation:
Betriebsspannung: 3.3V-5V DC
Arbeitsstrom:> 1A
Erkennungsabstand: 2 ~ 60cm
Erfassungswinkel: 35 °
Größe:
Big Board: 42 * 38 * 12 mm
Kleines Brett: 25 * 12 * 12mm
Montagelochdurchmesser: 3mm
Hinweis:
1. Stellen Sie die Sonde nicht in Richtung Sonnenlicht. Sonnenlicht verursacht Störungen des Moduls.
2. Die Empfindlichkeit sollte nicht zu hoch eingestellt werden, da eine hohe Empfindlichkeit leicht zu einem falschen Auslöser führen kann.
3. Bitte erlauben 1-3mm abweichung aufgrund der manuellen messung.
English description:
Features:
1.This module provides a versatile
infrared detection system solutions for automation machinery devices
such as smart cars, robots
2.The sensor module is adaptable to ambient light. It has a pair of infrared transmitting and receiving tubes.
3.Transmitting
tube sends out a certain frequency IR which will be reflected when
detecting obstacles (reflecting surface) and received by receiving tube.
4.After processing with comparator circuit, signal output interface outputs digital signal (a low voltage level signal).
5.When
the module detects obstacles signal, red indicator lights on and OUT
port continuous outputs low voltage level signals at the same time.
6.Detection distance can be adjusted with potentiometer, clockwise to increase and counterclockwise to reduce.
7.Target
reflectivity and shape is the key point of detection distance. Small
and black objects have minimum detection distance, while large and white
ones have maximum distance.
8.Output port can be directly connected to the SCM IO port, also can drive a 5V relay module or buzzer module directly.
9.Widely used in robot obstacle avoidance, car obstacle avoidance, assembly line counting and black white line tracking.
Specification:
Working Voltage: 3.3V-5V DC
Working Current: >1A
Detection Distance: 2~60cm
Detection Angle: 35°
Size:
Big Board: 42*38*12mm
Small Board: 25*12*12mm
Mounting Hole Diameter: 3mm
Note:
1.Do not put the probe towards sunlight. Sunlight will cause interference to module.
2.Sensitivity should not be regulated excessively high because high sensitivity can easily lead to false trigger.
3.Please allow 1-3mm deviation due to manual measurement.
Package Included:1pcInfrared Tracking Module Set