Description:

Flash:
YN-560 III is almost identical in specifications to the YN560-II except for one (possibly game-changing) addition: integrated 2.4GHz flash triggering.
√ YN560-III flash 2.4G wireless
√ using RF-602/RF-603 2.4G ultra-long-range wireless flash system.
Adopted by global users trust the allways RF-602/RF-603 wireless flash system. Support 2.4G ultra-long-range wireless flash, the lead flashing distances up to 100 meters above.
√ Full support for RF-603, RF-602 wireless transmitte
√ A YN560-III can accept RF-603 and RF-602 wireless transmitter emits a signal, supports 16 channels, wireless flash easily.
√ large-size LCD display
The the YN560-III is equipped with large-size LCD screen, easy clear, intuitive view or set the flash of the function, and easy to use.
√ equipped with power zoom function
ZOOM button, you can make a lamp covering a focal length between 24 ~ 105mm cycle movements.
√ GN58 @ ISO100, 105mm
High index 2.4G radio flash support M / Multi mode.
√ various trigger synchronization, flexible
The YN560-III can be triggered by the camera-top, 2.4G radio trigger, S1 and S2 to avoid the pre-flash-sensitive trigger.
√ equipped with an external power outlet
The YN560-III is equipped with an external power outlet, to meet your higher demand for call back speed.
√ equipped with a PC sync port
The YN560-III equipped with a standard PC synchronous port, using a PC sync cord flash sync flash.
√ voice prompt system
Open to the voice prompts, the flash voice prompts work state, so you can focus on the creative process (Note: the sound can be turned off).
√ a speeding call back system
Full light output recycling time of just three seconds, even without using the new battery, but also to get the speed of call back experience, only 4 to 5 seconds; You can also use external charging box call back again accelerated.
√ Advanced Options settings
The YN560-III with Advanced Options settings according to their needs, you can customize the flash function.
√ automatically save set
The YN560-III can automatically save your current operating settings, to facilitate the next time you boot.
√ metal texture hot shoe interface, rugged, reliable.

Suit for:
Canon: EOS5D,5DII 5D Mark II, 1Ds Mark [ IV / III / II / I ], 1D Mark [ III / II N/ II / I], 7D, 60D ,50D, 40D, 30D, 600D, 550D, 500D, 450D, 400D, 350D , 300D,1100D,1000D 650D 5D2 5D Mark III 6D
Nikon: D3s, D3x, D3, D700, D300s, D300,D200,D100, D90, D80, D70s, D7000,D5100, D5000, D3100,D3000, D60, D40X D800 D600
Pentax: K-7, K-x, K-m, K20D, K10D, K200D, K100D
Olympus: E5, E3, E30, E300, E620, E520, E420, E450, E-P2, E-PL2, E-PL1
Panasonic: G10GK, GH2GK, GH1GK, G2GK, G1GK, GF2GK, GF1GK

Trigger:
This RF-602 is using FSK 2.4GHz wireless frequency, suitable to use this free channel in many countries, guarantee of the transfer speed, distance and stability. There are three kinds of plugs, you can not only use it as a wireless remote shutter release, but also can use it as a flash trigger, you can connect them to control many types of flash speedlite and camera. What's more, if you have a new different camera, it's no need to buy a new RF-602, you just need to buy a related plug to connect with your camera, it's very convenient and easy to use it, I think it's a very good choise for you.
Specification:

Type: FSK 2.4GHz wireless remote sustem

Transmitter Distance: 100M

Channel: 15 difference channels and All channels

Release: Half-way press, Full-way Press

Receiver Terminal: Yongnuo 3-pin output terminal

Time of shooting: Up to 20000 times (Using CR2 Lithium battery NOT INCLUDED)

Receiver Stand-by time Up to 45hours (Using AAA battery NOT INCLUDED)

Dimensions: Transmitter : 38.4 x 48 x 27mm (W x H x D)

Receiver : 33 x 78 x 26mm (W x H x D)

Compatibility:
Function 1: As a Wireless Shutter Release.

Release mode: Focus and Shoot (Single-Shooting, continuous-Shooting, Delayed-Shoothing, B mode), all these modes should be set on camera in advance)

Function 2: As a Wireless Flash Unit Trigger.
Compatible Flashes Models:

Canon: 580EX II, 580EX, 540EZ, 520EZ, 430EZ, 430EX, 420EX, 420EZ, 380EX

Nikon: SB-900, SB-800, SB-28, SB-27, SB-26, SB-25, SB-24 (Not compatible with SB-600)

Pentax: AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT

Olympus: FL-50, FL36

Sigma: EF-500 DG Super, EF-500 DG ST, EF-430

Sunpak: Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D

YONGNUO: YN568EX, YN565EX, YN560EX, YN560II, YN560, YN468II, YN468, YN467II, YN467, YN465, YN460II, YN460, YN462

Function 3: As a Wireless Studio Flash Trigger.

Using with the 3.5mm Male Flash Sync Cable (Cable 3) and 3.5mm to 6.35mm jack adapter, the receiver can wirelessly synchronously trigger the Studio Flash(es).

Suitable:
C1 version:

Canon: 1100D, 1000D, 600D, 550D, 500D, 450D, 400D, 350D, 300D, 60D

C3 Version:

Canon: 1D,1DS,EOS 5D Mark II,5D,50D,40D,30D,20D,10D

N1 Version:

Nikon: D3X, D3, D700, D300, D2X, D2H, D200, D1H, D1X /

N2 Version:

Nikon: D70S, D80

N3 Version:

Nikon: D90, D5000, D3100, D7000

Package:

1 x YN560-III speedlite

1 x Mini Stand

1 x Protecting case

1 x Manual

1 x Original Box

1 x RF-600TX for Canon (Transmitter)

2 x RF-602RX (Receiver)

2 x Receiver to 3.5mm cable

2 x 3.5mm switch to 6.35mm plug

1 x User Manual