This auction is about si

This auction is about

small Motherboard FSC 836TR53A0F102 ( TR53A0+ ) (needs 12 volts! - so, for boats, cars, can also run on the battery, etc) from FSC S400 in top condition,

including CPU AMD Geode NX1500 (1000MHz) with passive cooler, with VGA, RS-232,

LPT Parallel, 4x USB

  

IDE controller on board, graphics on board (max. 1600x1200), start from CF card possible, 4x USB 2.0, 10/100/1000 network card, incl. RS-232 and sound card. The board is very small, the dimensions: 23.5 x 18 cm

In plain language: You only need a DDR1 memory module (like on a notebook), hard drive, USB stick or CF card as a boot drive, 12V power supply and you can use the board as a MiniPC in the car, on a boat, etc., as well as for downloading of data, as a router, control system etc!

CPU, CPU cooler, graphics card and USB and RS-232 interface are already on the board!

   

FSC MAT: 34010605 Mainboard NX1500 LAN Chip RTL8110SB 

        

We have more! You can find a 12V power supply with the right plug from us HERE, car adapter - HERE, The processor on this board is already on it, and you will find 512 MB of RAM HERE, cable adapter v. You can find IDE 40-pin (as on the board) on IDE notebook hard drive (44-pin IDE). HERE

        

              

               

        

             

Scope of delivery: 1x board incl. CPU and passive cooler, as shown and described, packaged securely by post.    

        

A power supply is not included in the scope of delivery. You will receive a power supply from 220V to 12V with the appropriate 4-pin plug HERE. A suitable used one. You will receive a car adapter (car adapter), please see the picture below HERE. 

If you want to save: If you need a 12V power supply - and power supplies with such a voltage are not uncommon, we have measured which contacts 12V needs to be supplied to (see picture below).  

This board already has a processor on it and you will find 512 MB of RAM HERE, cable adapter v. You can find IDE 40-pin (as on the board) on IDE notebook hard drive (44-pin IDE). HERE


In the picture below: Car adapter is not included in the scope of delivery, but is available.


    

Power supply of 12 volts can also be connected from the battery or from an older 12V power supply, 

just solder it in directly:




 IDE controller is 40-pin; If you need adapters for the IDE notebook hard drives, these are HERE to order... 

* * *

Noh more SCSI Hard drives HERE, at Ebay: just click on the image!

* * *

* * *

* * *

Great design for your eBay listings

* * *

Our other products on eBay (just click on it):
SET WITH
In plain language: You only need a DDR1 memory module (like on a notebook), hard drive, USB stick or CF card as a boot drive, 12V power supply and you can use the board as a MiniPC in the car, on a boat, etc., as well as for downloading of data, as a router, control system etc! We have more! You can find a 12V power supply with the right plug from us HERE, car adapter - HERE, The processor on this board is already on it, and you will find 512 MB of RAM HERE, cable adapter v. You can find IDE 40-pin (as on the board) on IDE notebook hard drive (44-pin IDE). HERE A power supply is not included in the scope of delivery. You will receive a power supply from 220V to 12V with the appropriate 4-pin plug HERE. A suitable used one. You will receive a car adapter (car adapter), pleas