Multifix 9 in 1 has been developed to bond materials to floor, wall and ceiling, where the extremely high initial strength of the product is very useful for this high performance adhesive. High initial grab and rapid development of final bond. Formulation is solvent free, very low odour, and chemically neutral. Instant grab can minimise the need for additional clamping or other mechanical supports. Good resistance to light, weather and ageing - suitable for internal and external applications. Surface must be clean, dry, dust-proof and degreased. Roughen non-porous surfaces. On materials such as glass, aluminium, ceramics, lacquered wood, epoxy and polyester no primer is required. Ensure good contact between the joint surfaces before applying adhesive. Apply a bead of adhesive to one or both surfaces. For larger bond areas, apply parallel beads at approx. 100 mm spacing, so that after joining the parts an aerated gap remains between the beads. Bring the two components together immediately. Sufficient working strength will normally develop after 10 minutes.