IR Sensor Wire + IR Blaster/Emitter Kit For Smart TV IR Repeater A/V Extender
This IR remote sensor/emitter cable kit is a replacement component for use with home A/V equipments that support infrared remote control extension
or video/audio extender kits that support IR remote extension too.
The IR sensor cable could be plugged into a video
source device that can support IR remote extension such as cable box, satellite
receiver, home theater system or video/audio extender and serves as the IR sensor for receiving the input of IR remote control
signal.
[Note]: Please check your video equipment first and
make sure that your A/V equipment does provide external plug-in for this type of
IR extension wire before you make the purchase as not all audio/video equipments
offer such plug-in.
The IR blaster/emitter wire could be used for those smart TVs, soundbars, IR repeaters, video/audio extender kits with IR OUT port.
Each standard package includes 1 of IR remote sensor wire and 1 of IR remote blaster/emitter wires. Each wire has the same length of 6.5 feet.
Easy Wire Extension
Both the IR blaster/emitter wires and the IR sensor wire all use the standard 3.5mm headphone plug. If you wish to extend these wires for
longer cable length in the setup, you can simply use longer 3.5mm or 2.5mm audio
extension cables to join with these IR input/output wires for cable extension if needed.
 |
IR Remote Sensor Wire
The IR remote sensor wire is used for receiving the control commands emitted from IR remote controller.
It could be plugged into a video
source device that can support IR remote extension such as cable box, satellite
receiver, home theater system or video/audio extender and serves as the IR sensor for receiving the input of IR remote control
signal.
 |
IR Remote Blaster/Emitter Wire
The IR blaster/emitter wire is used for blasting the IR remote control signal toward the A/V equipment to be controlled so the audio/video equipment can pick
up the control command signal and perform the operation needed for typical tasks such as play, pause, power on/off, volume up/down, channel +-, record and so on.
The IR blaster/emitter wire could be used for those smart TVs, soundbars, IR repeaters, video/audio extender kits with IR OUT port.
 |
- 6.5-feet long IR remote sensor wire x 1
- 6.5-feet long IR remote blaster/emitter wire x 1