Shading, Insulation and Bubble Fixings

No need to buy and mess around with extensions with these fixings they will give you the cavity needed, just fit the main fixing to the greenhouse bar and offer up your insulation or shading material then pierce and fit the washer. 

These Standard Green Fixings should only be used on greenhouses were the thickness of the slotted channel wall is no more than 1.5mm or if your greenhouse is badly oxidized otherwise they may be a tight fit.

They are designed to be fitted quickly by offering the cropped part into the channel and turning 90 degrees you then simply pierce your shading / insulation material and push on the washer customer say they are easier and quicker to fit compared with such as aliplugs or similar.

These fixings will also create a cavity of 22mm, any cavity you can create will help to reduce the build up of condensation and creating space from the glass and your insulation material.

Some of the dimensions are

• Overall Length 34mm including the spike
• Body Length 22mm excluding spike and cropped
• Cropped Part of the fitting 10mm x 7mm
• Diameter 10mm
• Washer 13mm
• For Material up to 2mm thick
• Please remember only suitable for greenhouses with channel walls no thicker than 1.5mm, painted greenhouses can also make them a tight fit

Corner fixings are available please see my other listing for details.

The greenhouse profile used in the photo is from a Europa Manor / Eden to give you and idea.