Product Details

1. MPL3115A2 I2C(Blue)
Specification:
- V2.0 version added power conversion module and IO port level conversion circuit for the 3.3V MCU and 5V chip
- Resolution:< 1 feet /0.3 M
- Pressure range: 20 - 110 kPa
- Compensation, direct reading (don't need software):
20bit pressure measurement (Pascal)
20bit measurements of height (metres)
12bit temperature measurement
- Onboard intelligence
- Sampling rate: maximum 128 Hz
 
Parameters:
- Absolute pressure measuring range: 20 to 110 kPa
- Relative measuring accuracy: -+0.05 kPa
- Effective resolution: 1.5Pa / 0.3m
- Working temperature range: -40 to 85 degrees C
- Power supply voltage: 2.5 to 5 V
- Logic IO port: 2.5 to 5 V
- I/O power supply voltage: 1.62 to 3.6 V
 
Power:
- Standby mode: 2μA
- Low power mode: 8.5μA, 1Hz sampling
- Compensated data output:
20 the pressure data, output per unit of Pascal
20 height data, output per unit of meter
12 temperature data, output per unit of degree C
- I2C digital output interface
- 2* programmable interrupt pin
- Built in 32 sample buffer of FIFO
 
 
Package include:
1 x Module
 
 
2. MPL3115A2 I2C(Red)
 
 
Features:

Resolution less than 1 ft / 0.3 m

Pressure range: 20-110 kPa

Compensation, direct reading (no software required):

20-position pressure measurement (Pascal)

20-bit height measurement (m)

12-bit temperature measurement

I2C digital output interface

2 programmable interrupt pins

Built-in 32 sampling FIFO buffer

Onboard intelligence: Flexible sampling rate up to 128 Hz
 
 
Specifications:

Absolute measurement range: 20 to 110 kPa

Relative measurement accuracy: ± 0.05 kPa

Effective resolution: 1.5Pa / 0.3m

Operating temperature range: -40 to 85 ° C

Supply voltage: 2.5 to 3.6 V

Logic IO port: 2.5 to 5.0 V

I / O supply voltage: 1.62 to 3.6 V

PCB size: 18 * 11mm

Power consumption: 2μA (Standby mode)

Low power mode: 8.5μA, 1Hz sampling
Package Include:
1 x MPL3115A2 I2C Intelligent Temperature Pressure Altitude Sensor For Arduino
 
3. MPL3115A2 I2C(Purple)
 
 
 
Features:

Vin: 3 to 5.5 VDC

Logic: 3 to 5V compliant

color: see the pictures

Pressure sensing range: 50-110 kPa (up to 10Km altitude)

1.5 Pa / 0.3 m altitude resolution

I2C digital output interface
Package Include:
1 x MPL3115A2 IIC I2C Barometric Pressure/Altitude/Temperature Sensor for Arduino
 
 
4. MPL3115A2 Dual Channel 
 
 
 
Product introduction:
1. Model: MPL3115A2
2. Operating Pressure: 20kPa to 110kPa
3. Press Type: Absolute
4. Output Type: digital
5. Installation: SMD / SMT
6. Operating Voltage: 2.5 V
7. Door Type: no doors
8. Operating Temperature: -40 ~ 85 degrees Celsius
9. Power Current: 2uA
10. Max Power Voltage: 3.6 V
11. Minimum Power Supply Voltage: 1.95 V
Package Included:
   1 x  Digital Pressure Sensor Module
  • EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
  • Payment must be received in 5 business days of auction closing.
  • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

  • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

    We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

DataCaciques