timebymail ... watch and jewelry accessories  

     

People are saying that watch repairing is a dying trade, well let us help you find top quality horologist tools and accessories at trade prices.  We specialize in supplying watch repair kits and accessories to the trade, we try our utmost to supply all the tools you'll need to repair your watch, from the budget starter packs to high quality Swiss tools.


 

 


Rolex Cermaic Submariner Replacement Watch Bezel Insert

Colours Available - Black, Green and Blue SELECT ABOVE

This New replacement Bezel Ring Insert is designed for the Rolex Submariner ranges. It measures 38mm in outer diameter and 30.8mm inner diameter. The Ring is an aftermarket version of the original Rolex part. 

If you would like to purchase one of bezel inserts then the below information will be useful.

Pearl Checking – Please check the pearl (at 12 O’clock) is secure after fitting. On all inserts the pearls are separate from the insert so can come off. We check that the pearl is supplied when they are dispatched but it's your responsibility to make sure the pearl is in place properly. You can use household glue to secure them in place (NOT superglue).

Removal - Use a sharp blade to gently lift the old insert slightly. Then work your way round the bezel lifting a bit at a time. Once you have removed the old one clean the area to remove any of the glue/adhesive that's left. Nail polish remover is good for this. 

Fitting - These inserts are NOT pressure fit. Most of our inserts have the adhesive already on the bezel in the form of very strong sticky back plastic (if not then you can use household glue - NOT superglue). Take the backing off (this is the tricky part) and align the insert to 12 O'clock. Once it is aligned you just place a cloth over the insert and press down to make sure it is stuck down correctly. Clean off any adhesive that might be on the bezel then that's it, finished.

 

 

 

 

 

 

 

 

 

 

 

 

 








  • Condition - NEW

  • Colour - Black / Green / Blue 

  • Diameter Size - 38mm (Outer Diameter) / 30.8mm (Inner Diameter) 

  • Thickness - approx. 1mm

  • Material - Ceramic

This product is designed for the Rolex Submariner but is not made by Rolex. There are NO trade marks on this product. It is purely designed as a replacement part and NOT a copy.

Rolex is registered trade mark of Rolex Watch Co. We are not affiliated with Rolex in any way.

Black with White Markings (P43A)

Black with Yellow Markings (P43B)

Blue with White Markings (P43C)

Green with White Markings (P43D)

If you would like to purchase one of bezel inserts then the below information will be useful.

Pearl Checking – Please check the pearl (at 12 O’clock) is secure before and after fitting. On all inserts they are two separate pieces so can come off. 

Removal - Use a sharp blade to gently lift the old insert slightly. Then work your way round the bezel lifting a bit at a time. Once you have removed the old one clean the area to remove any of the glue/adhesive that's left. Nail polish remover is good for this. 

Fitting - Most of our inserts have the adhesive already on the bezel in the form of very strong sticky back plastic (if not then you can use household glue - NOT superglue). Take the backing off (this is the tricky part) and align the insert to 12 O'clock. Once it is aligned you just place a cloth over the insert and press down to make sure it is stuck down correctly. Clean off and adhesive that might be on the bezel then that's it, finished.

We would be grateful if you could confirm your address as soon as possible after payment is made. We are truly sorry for any inconvenience this may cause but unfortunately Paypal are giving some addresses as "Not Verified".