Preparation: The surface must be clean and free from dust, loose paint and fungal growth or solid matter likely to interfere with the penetration of the sealer.
Application: Stir well before use and apply 2 liberal coats.
Coats: Apply 2 coats and brush out approx. 30 cms beyond affected area.
Drying Time: 1-2 hrs. Re-coating Time: 2 hrs between coats in warm conditions. Allow 2 hrs before applying a top coat or wall paper.
Application Temp: Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Compatibility: Can be over coated with most oil based and water based paints.
Settlement: STIR WELL BEFORE USE.
Clean-Up: Remove as much product as possible from the brush and clean with Rustins Xylene Thinners or Rustins Brush Cleaner. Hard brushes can be cleaned with Rustins Brush Restorer.
Shelf-life/Storage: A very long time if stored in a cool dry place with the lid firmly secured. Do not store below 10°C.
Hazards: Flammable. Repeated exposure may cause skin dryness or cracking. Keep out of reach of children. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. After contact with skin wash immediately with plenty of water. Wear suitable protective clothing and gloves. Use only in well ventilated areas.