Uhu plus endfest 15 gr.
High-strength 2-component adhesive based on epoxy resin in a practical double-chamber syringe - no more external mixing required!
Suitable materials to be bonded:
Metals, glass, porcelain, ceramics, wood, marble, stone, concrete, duroplast, glass fiber reinforced plastics, hard PVC, rubber, hard foam plastics, eg Styropor®. Not suitable for bonding on large glass surfaces.
Processing:
Very easy to work with - just snap off the nozzle cap and screw on the nozzle tip - press the syringe at the back - hardener and binder are mixed in the optimal ratio in the nozzle tip and then exit the nozzle tip at the front.
The adhesive surfaces must be dry and free of dust and grease. Roughen smooth surfaces. Apply adhesive on one side, on rough materials on both sides. Assemble parts to fit without pressing.
Hardener and binder can of course also be squeezed out in equal parts without a nozzle tip and mixed with a mixing spatula in the conventional way.
Please note the safety instructions on the packaging.
pot life: Depending on the amount used and the ambient temperature. At room temperature approx. 90 minutes.
hardening: The hardening time depends on the temperature, whereby the final strength can be increased by heating (not over 200°C - see table).
temperature curing strength 20 °C 12 hours 1200N/cm2 40 °C 3 hours 1800N/cm2 70 °C 45 mins 2000N/cm2 100 °C 10 mins 2500N/cm2 180 °C 5 mins 3000N/cm2
10N/cm2 = 1kg/cm2 |