2-axis 7" LCD CNC
Control System For Flame/ Plasma Cutting Machine Controller
-
We can provide the English manual, please contact us!
-
-
Brief introduction:
Note:
The USB port output power of the system is very small, and
it can only be used by the U disk. It cannot be connected to other USB devices
to prevent damage.
System functions:
SF-2100C-QG cutting machine CNC system is suitable for all kinds of flame / plasma,
high pressure water jet, laser cutting machine, widely used in metal processing,
advertising, stone and other industries.
The system is highly reliable and has the ability to resist plasma interference,
lightning strikes and surges.
Practical flame/plasma cutting process, automatic corner rotation control and
height control control during plasma processing; remote operation with wireless
remote control.
It has the function of kerf compensation, and whether the compensation in the
program is reasonable, and the corresponding report is made for the user to
choose;
Breakpoint recovery, automatic power-off recovery function, automatic memory
breakpoints;
Arbitrary selection and selection of perforation point processing functions;
It has an epitaxial perforation function for thick plates and a bridging
function for thin plates;
Back-off, selection, breakpoint recovery, optional perforation position and
other functions, greatly facilitate the user's control;
Transfer cutting at any time;
It adopts a special small line segment processing function, which makes it easy
to walk and can be widely used in metal cutting and advertising, wrought iron,
etc.
A library of 24 graphics (expandable and customizable) containing common basic
machining parts;
Fully compatible with StarCAM nesting software, compatible with IBE (Germany),
FASTCAM and other mainstream nesting software;
Chinese and English operation interface conversion, dynamic graphic display, 1
to 8 times of graphic magnification, automatic tracking of moving points, U disk
reading program and timely software upgrade.
-
Specification:
Technical indicators:
Processor: using industrial grade ARM processing chip;
Display: 7-inch color LCD display;
Power: DC24V/2A power input
Input\Output: The system provides 16 optically isolated inputs and 16 optically
isolated outputs.
Number of linkage axes: 2 axes, (can be driven by X-axis bilaterally or Y-axis
bilaterally)
Maximum speed: not less than 24 m / min;
Pulse equivalent: flexible adjustment;
Storage space: 4G large user program storage capacity, processing procedures are
not limited;
Chassis size: 298 × 202 × 65 (mm);
Working temperature: 0 ° C ~ +40 ° C; storage temperature : -40 ° C ~ +60 ° C ;
Function word definition:
N command segment number
G preparation function
M auxiliary function
T tool function (in this system is the flame width)
L cycle number, delay time
X X axis (diameter) absolute coordinates
Y Y axis absolute coordinates
I When the arc is machined, the center coordinate value is reduced by the X axis
starting point value.
When the arc is machined, the center coordinate value is reduced by the Y axis
starting point value.
R arc radius specification
H arc string height specification
A auxiliary variable
F machining speed specification for G01, G02, G03
Parameter Description:
Speed parameter
Starting speed, adjustment time and maximum speed limit of each axis;
System parameters
Electronic gear ratio of each axis, machine origin, reference point, backlash,
line offset, soft positive/negative limit;
Flame cutting parameters
Ignition delay, preheating delay, cutting gun up/down delay, perforating torch
up/down, piercing delay, etc.
Plasma parameter
Cutting gun positioning delay, M command for arcing, M command for arc breaking,
arc pressure detection selection, positioning detection selection, piercing
delay;
control parameter
Flame/plasma selection, processing speed limit, edge perforation selection,
metric/imperial selection, etc.
Storage function
The modified parameters are stored in the parameter area.
Press the S key continuously to select the external manual control button to
select whether it is valid or invalid.
Software upgrade operation instructions (software free upgrade)
First, the operation steps
1. Format the USB flash drive in FAT or FAT32 format. It is recommended to use
the FAT format.
2. Copy the upgrade file into the USB flash drive. The name of the upgrade file
must be STARTCNC.EXE.
3. Press and hold the arrow button on the left side of the USB port to power on
the system, power up the system, and plug the USB disk into the USB port of the
system.
4. The system automatically enters the upgrade interface, press the F1 button on
the panel (ie, the corresponding button for the upgrade);
5. If the upgrade is normal, after the upgrade is complete, the system will
display “Upgrade Successful!”.
6. Turn off the power, pull out the USB flash drive, and the upgrade process is
complete.
Second, the exception process of the upgrade process
Check that the name of the upgrade file must be STARTCNC.EXE.
If this factor has been eliminated, you can re-operate according to the
operation steps. If multiple attempts still fail, you can call customer service.
The details of the CNC system are as follows:
1pcs SF-2100C system
1pcs 25 core hole input plug (including sheath)
1pcs 25-pin needle output plug (with sheath)
1pcs 15 core hole remote control plug (including sheath)
1pcs 15-pin pin motor plug (with sheath)
1pcs 9 core hole communication plug (including sheath)
1pcs 3P green terminal DC24V power plug
Packing box size: length 400mm\width 220mm\height 340mm;
Interface display language:
Chinese, English, Russian, French, Spanish, Slovak
|
Contact Us:
1. We have always been trying to provide the best service and reliable products
for every customer, however, accident may happen sometimes, please contact us to
resolve any issue before leaving a negative feedback.
2. Please contact us by "Ask a question".
Payment
1. Payment methods
accepted :
Paypal
only.
2. Payment must be
received within 7
business days of
auction closing.
Shipping
1. We ship your
orders within 1-2
business days after
the payment
received.
2. Item shipped via
Singapore Post or
HongKong Post , It
takes about 7-14
business days (USA,CA,AU,UK). others
country 10-20
business
days(Brzil,India,RU), Exact
delivery time
depends on postal
process.
3. If you do not
receive your item(s)
by 30 business
days, Please feel
free to contact us
via ebay mail system
, we will try our
very best to resolve
any problems with
you
Return Policy
1. Return is
accepted within 14
days after the
buyer's receiving
the item.
2. If this item is
defective upon
receipt, customer
has up to 14 days
from date of receipt
for exchange of a
new one.
3. Unused/unopened
merchandise will be
fully credited.
Other Policies
We are not
responsible for any
custom duty or
import tax.
Any customs duty applied to the parcel
should be covered by the buyer.
As has been stated on the eBay item description, Import duties, taxes and
charges are not included in the item price and shipping charges.
These charges be at the buyer responsibility. meanwhile the customs tax depend
on the buyer local customs office.
If you need we write
low price on
shipping bill, pls
leave message when
you make payment .
All emails will be
answered within 24
hours. If you do not
receive our reply,
please kindly
re-sent your email
and we will reply to
you as soon as
possible, Suggest
send eBay message to
us, That is easy to
find .
|
|
|