56MM/2" COMPAC BOTTOM DRAIN 

Our COMPAC bottom drain has been designed to work in conjunction with 56mm solvent weld pipe. Please view our pipe identification chart to find your correct pipe size. 

This COMPAC bottom drain is suitable for smaller ponds, or for multiple inlets/outlets. 

A standard Bottom Drain has a 90 degree outlet. The COMPAC bottom drain uses a vertical outlet from its base, making it ideal to be placed at any height in the pond, from a bottom drain to a surface skimmer.  

It is simple to install through a pond liner or rigid tank using the ring and stainless steel screws provided (quantity will vary depending on the size of the COMPAC bottom drain). 

The COMPAC bottom drain will fix to any tank or filter box with the stainless steel screws and ring provided, allowing for rigid pipe or fittings to be firmly sealed to the tank/filter box, like a conventional flanged tank connector. 

Our COMPAC bottom drain should not be confused with inferior tank connectors. Many inferior products use zinc plated screws that can have adverse effect under water, especially when salt or chemicals such as formalin and malachite green come into regular contact with such fixings. This will have a negative effect on your pond water quality. 

Please Note: The size stated on the listing refers to the internal diameter (ID) of the COMPAC bottom drain body and which size pipe (OD of pipe) it will accept. Please refer to the pipe size identification chart that has been provided to identify what pipe you have and what fittings you require. 

Always use a non toxic sealant. 

Solvent Weld Fitting. 

This listing comes supplied with a COMPAC bottom drain body, dome, ring and stainless steel screws (quantity will vary depending on the size of the COMPAC Bottom Drain).