SUNKKO 719A Li-on Battery Universal Battery Spot Welder Pen Y-Type Welding Pen
SUNKKO HB-71A Y-type spot weld
HB-71A battery Spot welding pen U type interface Pure copper wire suitable for S709A S719A Personal DIY Pulse spot welding pens
Features:
1. Multi-hole heat dissipation ensures that the product will not overheat during use.
2. Ergonomic grip for long-term use
3. 24K gold plated interface, not easy to oxidize, plug and play
4. The welding distance can be adjusted as needed
5. Suitable for different size power battery packs, button battery nickel sheets, hardware, stainless steel wire, etc.
6.Independent sets, convenient for transportation and assembly;
7.All low-resistant oxygen-free copper materials, discharge point welding is stable;
8.with the "7" welder series welder, which provides the welding function is greatly enhanced;
9.Removable tip style for easy replacement of seams of different sizes;
10.Anti-slip sets of professional pen-shaped handle for easy grip;
11.Built-in pressure balance elastic method of discharge spot welding excellent;
12.Aluminum alloy solder pins, long life.
Application:
4 Welded metal case with an electric wire;
1. lithium battery point welding wires;
2 Electronic contour board Spot welding;
3 point welding metal parts;
5 Electronic Hobbits Electronic Industrial Welding.
Specification:
Brand Name:SUNKKO
Usage:For S709A S719A
Model: HB-71A
Solder Pin Spacing: 2-7mm
Cable Cross Section: 16mm
Solder Pin Size: 1.5mm*7mm
Welding pen and cable length:560mm
Welding Pulse Current: 0-500A
Power: 1900W
Weight: 300g
Package included:
1XWelding Pen
1 X Hex Wrench
2 X Screw(coarse)
2X Screw(fine)
2X Nut
2XTablets Connection
Connection and use:
the connection point before the first welding handle welding joint aircraft with a thin sandpaper slightly polished to expose metallic shine,
To prevent future oxidation of the surface, it can be coated with lubricating oil in tracking its joint aircraft.
the same way of discharging the copper head of the point welder on the working plane.
spot welding with a universal handle on the inside of the M4 SHCS handle spot welds to be welded, must be tightened
M4 screws tightly to maintain good electrical conductivity.
welding power unit Connect to the outlet, instead of using a power wheelchair, otherwise
poor power supply will affect the welding effect.
since spot welding cables up to 0.65 m X2, it will reduce the power of the original impulse discharge of the welder
When the flow, such as the means for welding the first wife, a series of spot welding operations should be transferred about twice.
fixed tip Φ1. 5 anodized aluminum soldering pins, after the loss of light can be made to pull on the jigsaw,
The welded needle, The new needle should be pressed against the bottom of the welded joint.
to ensure the quality of spot welding, welding should be stored in the cleanliness of the oxides at the tip.
