Feature:

1. Used as a square wave signal generator to generate square wave signals for experimental development.

2. Used to generate a square wave signal that drives the stepper motor driver.

3. Generate adjustable pulses for use by the MCU.

4. Generate adjustable pulses to control the associated circuitry.

5. 100% Brand New and High Quality

Specification:

Type : Rectangular Wave Signal Generator

Material: Plastic

Size: 2.9CM*3.6CM

Main chip: NE555

Input voltage: 5V-15VDC(When 5V is supplied, the output current can be around 15MA; when 12V is supplied, the output current can be around 35MA)

Module weight: 10 grams;

Input current: ≥100MA

Output amplitude: 4.2V V-PP to 11.4V V-PP. (The output amplitude will be different depending on the input voltage)

Output current: ≥15MA (5V power supply, V-PP is greater than 50%), ≥35MA (12V power supply, V-PP is greater than 50%)

Advantages :

1. The output has LED indication, and the output is directly clear (the LED amount when the level is low, the high level LED is off, and the LED flashes when the frequency is low.

2. The output frequency range is optional (selected with a short-circuit cap) to make the output frequency more continuously adjustable; Low frequency file: 1Hz ~ 50Hz Medium frequency file: 50Hz ~ 1kHz Medium and high frequency files: 1KHz ~ 10kHz High frequency file: 10kHz ~ 200kHz.

3. The output frequency is adjustable; Period T = 0.7 (RA + 2RB) C 4, RA, RB is 0-10K adjustable; C=0.001UF in low frequency gear; C=0.1UF in the intermediate frequency file; Medium and high frequency file C=1UF; C=100UF in high frequency gear, so the frequency of the waveform can be calculated by the buyer.

Package Content:

1pc *  Rectangular Wave Signal Generator

Note: