ANCEL BST100 Car Battery Tester 12V 220Ah 2000CCA Battery System Detect Auto Battery Analyzer for Car Battery Tool PK KW600 ANCEL BST100 12V Car Battery Tester is able to effectively analyze and read important car data such as voltage, internal resistance, cold cranking amp and AH capacity, battery health and charge status. It provides accurate results, calculates the cold cranking capability of the battery and the aging extent, allowing for a quicker, more precise car repairing.
It provides techs or DTYer with a quick, simple and cost-effective solution to know the battery's charging status better , check the battery's health and detect faults. Does your Battery need to be replaced? There are more and more on-board electrical appliances, and the requirements for battery capacity and quality are getting higher and higher. Have you encountered the following problems？Can your battery still support it?
1. Can not start the car
2. Unsteady engine idling
3. The power system is not working properly What are ANCEL BST100 Advantages: 1.Simple and easy to use
2.Tests batteries on and off the vehicle
3.Accurate results in milliseconds
4.Battery life analysis
5.Analysis results: Good or Replace
6.Large easy to read LCD screen
7.Test results based on
8.CCA,BCI,CA,MCA,JIS,EN,DIN,SAE,GB and IEC
Standards
9.Quick test - inputs battery volume (AH), then shows battery status
10.Vehicle cranking system test - cranking time, voltage and statu
11.Vehicle charging system test—load voltage, unloaded voltage, ripple status, and charging system status ANCEL BST100 Support Languages: English, Portuguese,French, German, Russian, Spanish, Italian Wide Range of Application of ANCEL BST100 Battery Tester ANCEL BST100 can test 12V batteries, suitable for a variety of common models and equipment. (For Motorcycle, Car, SUV, VaLight truck batteries) ANCEL BST100 supports multiple battery types: Regular Flooded Battery, AGM Flat Plate Battery, AGM Spiral Battery, GEL Battery, EFB Battery ANCEL BST100 Function 1.Identify battery status Good or Replace
2.Check Battery Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
3.Check Internal resistance value (Ohm)
4.Display battery life in percentage (%)
5.Battery Cranking Test, load test
6.Battery Charging Test, Ripple Test
7.Support battery ripple test and review test data BST100 12V Battery Tester Features 1.Fast and smooth running speed with STM-32 chip set hardware
2.Accurate test results, using high precision amplifier and calibrated by professional battery testing tool, BST100 reading accuracy up to 99%.
3.Wide testing range cover from CCA 100- 2000 , 3- 220 AH, best in the market.
4.Industry initiative graphical battery voltage real time monitoring, can be analysis battery data more accurate.
5.Unique battery results display in percentage and meter mode.
6.Test all automotive cranking lead acid battery, including ordinary lead acid battery, AGM flat plate battery, AGM spiral battery, and Gel battery, etc.
7.Polarity reverse connection protection, reverse connection will not damage the tester or affect the vehicle and battery.
8.Directly test the battery with loss of electricity, no need to full charge before testing.
9.Testing standards include currently the world's majority of battery standards, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
10.BST100 is used to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL EPB cell  Charging System Test In addition, it analyzes the state of the charging system and the battery through the above data, provides you with an accuracy test of the charging system.
Simple and safe connection
Internal protection device, if connected incorrectly.will not damage the tester
Battery Ripple Test Analysis
A major upgrade from the basic tester, in-depth analysis for battery voltage change at each stage. Excelllent Using Experience The specianl material of the product provides u with more accurate test result and safe operation. Battery Ripple Test Analysis A great update from basic tester, deep analysis for battery voltage change at each stage Ancel BST100 Car Battery Tester Application Use for testing a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) from Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The main battery standards JIS, SAE, EN, DIN and IEC are supported. Product Details (1) It can be used for checking almost all the batteries including low capacity battery and internal resistance of the notebook battery exclusively.
(2) It will not harm the battery by using this method. |
