********* IN STOCK @ Melb*********
***GST Invoice Provided***
"Registered AU Local Business"
" We Don’t Launch Mediocre Home-Made Products, Every Piece is Your Absolute WORKHORSE!"
Product Offering: 1x AEG 18v Battery Adapter to Milwaukee Tools (Batteries & Tools are not involved)
Please note this is NOT 3D printed adapter, our PP material is 5 times+ stronger than TOXIC ABS+ material.
We have 3D Printed PLA+ adapters available at $59.9 which is betterin all ways than ABS+.
BEWARE of ANY ABS BasedITEMS as ABS material is a possible cause of CANCER according to EU Restrictionof Hazardous Substances Directive.
-Durable PP Material throughout: Extremely Stable under All Tough Working conditions after 80 Weeks (Supported by Construction Groups & Universities)!
-Mature Products manufactured through expensive Miller, Tightly Fit and Never Fall Out!
-Low-Volt-Discharge Control Board Inside to minimize possible negative impacts on batteries!
-Convenient Locking Latch to easily remove adapter from tools!
-130g only, suits all light / heavy Construction and Home build works!
-24/7 After-sales service team waiting for any product related questions!
-30 Days Money Back Guarantee + 52 Weeks Replace Warranty under Terms & Conditions
(ONLY if you purchase from CrossFirePower eBay Official store or Domestic Registered Distributor)
About us:
- GST Registered Local business based at Melbourne , .
- Full sized experienced R&D Team to accomplish your request.
- Long term harmonious working relationship with multiple domestic construction groups for private and government projects.
- We provide 30 Days Money Back Guarantee + 52 Weeks Replace Warranty under Terms & Conditions （ONLY if you purchase from CrossFirePower eBay Official store or Registered Distributor）
- We Don’t Launch Mediocre Home-Made Products, Every Piece is Your Absolute WORKHORSE!
We always seeking for your invaluable feedback to improve products, You will get A Free Upgraded Adapter if your improvement advice is taken!
Get 5% off when you purchase any 2 adapters!
As a new online business ,we appreciate your trust.
Everything will be posted out within the guided time frame from Melbourne through Australia Post with tracking.
For all international business, Please message us to get freight quote to your country before placing the order.
***We launched around 50 models so Simply Hit Us with What You Need!***
Don’t be locked into one brand of tool - our 18v battery adapter allows you to add the Makita tool range to your arsenal.
Included in purchase: 1 x AEG adapter to Milwaukee 18V tools (no batteries/Tools included)
Please see our other listings for DeWalt, Makita, Milwaukee tool adapters.
We are innovators, working continuously to improve our product on every level to deliver the best product to you. 8 Business days to accomplish a new design and 2 weeks to add it to the product line.
Disclaimer- cannot be applied on Charger . Never fully discharge your Lithium ion batteries and treat your adapter as you would your batteries (make sure contacts never short). -We are not associated with either Ryobi,Makita Bosch DeWalt or Milwaukee .Use at your own risk, we do not bearresponsibility for any injuries, loss or damage to any person or equipment what so ever when using this adapter. It can be dangerous to over discharge Lithium-ion batteries, the battery protection circuit is inside the tool, notthe battery and as such the user of this adapter must be careful not to over-discharge the battery.
Under no circumstances shall we be liable for any damages arising from or related to the adapter.
Please note you need to closely monitor your batteryremaining capacity during the usage, there isn’t a defined workinghour as batteries conditions aren’t same.
CustomersNEED to switch the DIY light off MANUALLY by using the power switch at the backto avoid potential overly discharge issue of the battery. We bear limitedresponsibilities for misuses of the product .
If Youneed the DIY LED that installed with our own designed “OVER-Discharge ProtectUnit” for better user experience in workplace, please view our listings or send a us message for the direct link ofthe model you are after.
WEARE NOT associated with ANY of other companies and all DIY LEDs/ADAPTERS (thatpowered by other branded batteries) should be considered as INDEPENDENT THIRD-PARTY ITEMS insteadof originals. Customers SHOULD NOT place any order in the very first place ifthey DO NOT ACKNOWLEDGE this notification.
1YEAR FULLY-COVERED REPLACE WARRANTY for all products we sell needs to beclaimed from us directly.
Milwaukee Battery Adapter To AEG Ridgid 18v Battery Adapter Converter Milwaukee
********* IN STOCK @ Melb*********
***GST Invoice Provided***
"Registered AU Local Business"
" We Don’t Launch Mediocre Home-Made Products, Every Piece is Your Absolute WORKHORSE!"
Product Offering: 1x AEG 18v Battery Adapter to Milwaukee Tools (Batteries & Tools are not involved)
Please note this is NOT 3D printed adapter, our PP material is 5 times+ stronger than TOXIC ABS+ material.
We have 3D Printed PLA+ adapters available at $59.9 which is betterin all ways than ABS+.
BEWARE of ANY ABS BasedITEMS as ABS material is a possible cause of CANCER according to EU Restrictionof Hazardous Substances Directive.
-Durable PP Material throughout: Extremely Stable under All Tough Working conditions after 80 Weeks (Supported by Construction Groups & Universities)!
-Mature Products manufactured through expensive Miller, Tightly Fit and Never Fall Out!
-Low-Volt-Discharge Control Board Inside to minimize possible negative impacts on batteries!
-Convenient Locking Latch to easily remove adapter from tools!
-130g only, suits all light / heavy Construction and Home build works!
-24/7 After-sales service team waiting for any product related questions!
-30 Days Money Back Guarantee + 52 Weeks Replace Warranty under Terms & Conditions
(ONLY if you purchase from CrossFirePower eBay Official store or Domestic Registered Distributor)
About us:
- GST Registered Local business based at Melbourne , .
- Full sized experienced R&D Team to accomplish your request.
- Long term harmonious working relationship with multiple domestic construction groups for private and government projects.
- We provide 30 Days Money Back Guarantee + 52 Weeks Replace Warranty under Terms & Conditions （ONLY if you purchase from CrossFirePower eBay Official store or Registered Distributor）
- We Don’t Launch Mediocre Home-Made Products, Every Piece is Your Absolute WORKHORSE!
We always seeking for your invaluable feedback to improve products, You will get A Free Upgraded Adapter if your improvement advice is taken!
Get 5% off when you purchase any 2 adapters!
As a new online business ,we appreciate your trust.
Everything will be posted out within the guided time frame from Melbourne through Australia Post with tracking.
For all international business, Please message us to get freight quote to your country before placing the order.
***We launched around 50 models so Simply Hit Us with What You Need!***
Don’t be locked into one brand of tool - our 18v battery adapter allows you to add the Makita tool range to your arsenal.
Included in purchase: 1 x AEG adapter to Milwaukee 18V tools (no batteries/Tools included)
Please see our other listings for DeWalt, Makita, Milwaukee tool adapters.
We are innovators, working continuously to improve our product on every level to deliver the best product to you. 8 Business days to accomplish a new design and 2 weeks to add it to the product line.
Disclaimer- cannot be applied on Charger . Never fully discharge your Lithium ion batteries and treat your adapter as you would your batteries (make sure contacts never short). -We are not associated with either Ryobi,Makita Bosch DeWalt or Milwaukee .Use at your own risk, we do not bearresponsibility for any injuries, loss or damage to any person or equipment what so ever when using this adapter. It can be dangerous to over discharge Lithium-ion batteries, the battery protection circuit is inside the tool, notthe battery and as such the user of this adapter must be careful not to over-discharge the battery.
Under no circumstances shall we be liable for any damages arising from or related to the adapter.
Please note you need to closely monitor your batteryremaining capacity during the usage, there isn’t a defined workinghour as batteries conditions aren’t same.
CustomersNEED to switch the DIY light off MANUALLY by using the power switch at the backto avoid potential overly discharge issue of the battery. We bear limitedresponsibilities for misuses of the product .
If Youneed the DIY LED that installed with our own designed “OVER-Discharge ProtectUnit” for better user experience in workplace, please view our listings or send a us message for the direct link ofthe model you are after.
WEARE NOT associated with ANY of other companies and all DIY LEDs/ADAPTERS (thatpowered by other branded batteries) should be considered as INDEPENDENT THIRD-PARTY ITEMS insteadof originals. Customers SHOULD NOT place any order in the very first place ifthey DO NOT ACKNOWLEDGE this notification.
1YEAR FULLY-COVERED REPLACE WARRANTY for all products we sell needs to beclaimed from us directly.
All orders are shipped by AusPost
- Nationwide Free Standard Postage
- A$9.9 Express Shipping Nationwide (usually $A20.33)
* Overseas Customers are subject to Extra Postage Charges for shop promotions based on weight. Free Postage when you shop over $300
Based on our experience, postal could take 8 business days to UK/US/CA and we post out same business day.
- (On delivery signatures are available for an additional A$2.95/ A$6 For International
- Please message us if you would like your order to be insured
We drop all parcels into st boxes directly. In accordance with AusPost, this may lead to issues with NON-SCAN or SKIP-SCAN. As a result, your parcel may only get scanned on the day of delivery. Free Shipping doesn’t inc delivery signature services. This may result in “Drop at Safe Place” if the postman determines that is safe).
Alternatively, your assignment will be transferred to LPO, you will then need to collect parcel in person within 10 days. Your parcel will be forwarded to the Dead Parcel Centre if it not collected within the guided time frames and we will NOT be able to assist further.
Australia Post are usually good but do let us down sometimes. If your order has not arrived on time, please simply let us know and we will loge a case with PO directly. We are AusPost’s TOP Band Business clients, therefore, they highly prioritize our cases.
Posting to certain countries like Chile can only be posted via DHL signaturer if Australia Post do not offer services, this is to say, we may cancel your order if you do not pay for extra chargers for the quotation of DHL Express.
1. Extend 6 Months Warranty by registering your product through CrossFirePower website
2. Get up to 20% off when you purchase in bulk!
3. 1x Free Battery Holder when you shop $50+ from us (Attach Note “Holder” when checking out is required, only available for Milwaukee/Makita/DeWalt/AEG/Ridgid/Hitachi/Hikoki Models)!
4. 1x FREE Work Light (PM for Brand) when you shop A$300+ in one transaction from us!
5. 1x Free soldering station (LED model) when you shop A$550+from us!
6. Refer to a Friend to get $10 off for both parties (order number required)!
7. Free 12mm Glue Sticks (up to 3) when you purchase Hot Glue Gun (with request)!
8. FREE Commercial Sample for NEW Product Development Projects!
WE ARE NOT associated with ANY of other companies and all CrossFirePower Branded product such as but not limited to soldering Irons/LEDs/ADAPTERS/Hot Glue Guns/ (that powered by other branded batteries) should be considered as INDEPENDENT THIRD-PARTY/replaced ITEMS instead of originals/genuine items. CrossFirePower has not received any technique/financial support from any other companies and institutions to develop/manufacture own branded products. Customers SHOULD NOT place any order in the very first place if they DO NOT ACKNOWLEDGE this notification.
Standard Seller warranty for all items we listed on our store
30 Days Money Back Warranty / 1 Year Faulty-Replace Warranty, Extend 6 Months Warranty by registering your product through CrossFirePower website
Change of Mind returns are subjective to item conditions. Buyer needs to cover postage costs under the change of mind/ordered by mistake reason. Restocking fee may apply.
CrossFirePower offers all customers 6 Months additional warranty if they register their products within 14 days of delivery of their parcel.
Our sincerity in customer service and expertise in CE field make us the very choice for major companies and government agencies like: AG Tyres Australia, ASI Electrics, Ashdown Ingram, Toll AU, Tunneling Solutions, MM Electrical Merchandising, NSW Metro, NSW pathology along with 500+ other Australian companies & 15,000+ hardworking Aussies & households.
Here at CrossFirePower, we have been committed to our pledge of operating the most Innovative Additive Manufacturing Company In Australia. Our goal has always been to provide an opportunity for people to engage and contribute to a more affordable and professional consumer initiative.
CrossFirePower R&D Team now hold 5+ Australian innovation patents and 10+ registered designs that cover 100% of product lines. We are developing NEW projects on weekly basis.
Simply Tell Us What You Need and our genial staff will provide you with right solution.
Due to eBay policy restriction, Please provide us with your E-mail for GST invoice.
We offer pick up service for Melbourne orders.
You may also like...
© 2022 CrossFirePower, All rights reserved.
