4. The front and rear LED of the LED flashes when you knead the brake, allowing you to drive more safely at night.
5. Extends and non-slip pedal, a more comfortable driving experience.
Buy with full peace of mind and confidence:
1-Month for tire, including the inner tube tire and the outer tire;
6-Months for batteries and chargers;
1-Year for the rest parts despite tires, batteries, and chargers.
3-Years for free after-sales support and replacement of small accessories, such as screws and so on.
Riding Skills:
-Put your foot in the front of the scooter and the other foot on the floor before riding.
-Make sure that the riding route is smooth.
-Slide forward with the food standing on the floor before starting (like riding the scooter without power).
-Immediately press the acceleration button and lean forward to avoid falling over backward due to inertia, so that the electric scooter will enter the working status.
-Avoid pressing the handle with your body in the acceleration and deceleration process. Put one foot ahead and the other behind (like on the sliding plate/surfboard, put one foot ahead and the other behind by 70-90 for better comfort).
-Turning – The turning principle of the electric scooter is the same with that of surfboard/sliding plate/skis. The handle shall be balanced with the body. Observe and make sure that turning is safe before turning.
Tips:
Before riding the scooter, please put one foot on the scooter deck and the other foot on floor and push the scooter forward by kicking the floor for some distance, in this way, the scooter will get some impulse to run forward.
Warning: It is illegal to ride electric scooters on public roads, pavements, or cycle paths. They are intended only for use on private land with the owner’s permission.
Before use S10, please kindly read the schematic diagrams and assembly steps of manual to assemble the front wheel:
1. Step on the base, lift the fork firmly to remove the base.
2. Remove the rubber plugs on both sides of the front fork, and unscrew the front axle with the two 6mm hexagon wrenches in the package.
3. When installing the front wheel (please pay attention to the direction of the tread of the tire, as shown in the lower right or the inflation port to the right), and tighten the front wheel axle.
4. Plug back the rubber plugs on both sides of the front fork.
Megawheels S10
Megawheels S11
Megawheels S1
Megawheels S5
Feedback
Le 18-avr.-22 à 18:47:37 Paris, le vendeur a ajouté les informations suivantes :
Le 9 mai 2023 à 11:24:41 CEST, le vendeur a ajouté les informations suivantes :