Items Description
Features:
100% brand new and high quality.
Compact design and beautiful shape; 4 keys to control.
Use of radio frequency technology, transmission distance, no direction, transmission of high sensitivity, no signal blocker.
The four buttons could respectively copy four different types of chips, that is a remote control can operate four different types of facilities.
433MHz,transmit distance is 50-100m(Open space) ,bringing you new experience of remote control and much convenience in your daily life.
High accuracy of copying and high effective of copying,easy to install and use.
Ultra-small error of copying data code and copy oscillation resistance. Privacy is strong.
4-channel radio control machine for cars, car roofs, garage doors, gate doors, alarm systems, heating systems, home automation, etc.
Specifications:
Working voltage: DC6V
Working current: ≤10mA
Working frequency: 433.92MHz and other frequencies are optional
Transmitting power: ≥10mW
Launch distance: 100 meters (open)
Frequency deviation: ± 0.2MHz
Transmission rate: 50--60KHZ
Oscillation resistance: according to customer needs
Working chip: 2262, 2260, 2240, 1527, copy type, etc.
Package includes:
1x Electric Gate Garage Door Remote Control
Instructions:
In the configuration and selling process, most clients wish to replace the original remote control with a general remote control, while such remote control has not be developed. You may configure your remote control within 2 seconds if you meet the following three conditions:
Condition I: the original remote control may be used normally.
Condition II: know the transmission frequency of original remote control.
Condition III: IC of original remote control is PT2262 PT2264 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 PT2240 or without code.
Copying method:
1. Resetting before copying: press two keys on copying remote control at the same time until LED flicks, indicating the resetting is successful. After resetting, press the key of remote control, and LED will be off.
2. Copying: place the product correctly before copying. Place the original remote control and copying remote control on the desk. Use right hand to press the copying remote control until LED is on – off, indicating it enters to copying status. Use left hand to press the key of original remote control. The fast clicking of LED of remote control indicates success in copying. The copying method is the same as for several keys.
Tips: if you reset the code of remote control and want to recover, press two keys until LED light flicks.
Technical parameters:
1. IC model of original remote control is 2262 2260 1527 2240 and compatible IC.
2. It is unnecessary to consider vibration resistance and address code. The project may be compatible to vibration resistance and address code.
3. The inapplicable IC is HCS300 30 and compatible rolling code IC.
4. The battery used in the product is 12V. please replace the battery when the remote control distance is insufficient.
Note:
- Please allow minor errors due to manual measurement. Thanks for your understanding.