Upon cure, MAX CLR creates a hard coating over the applied image that is very clear and glossy. It is resistant to surface scratching and demonstrates color stability.
Click Window To Watch Video Demonstration
How To Mix Epoxy Resin For Food Contact Coating. Avoid Tacky Spots, Minimize Air Bubble When Mixing - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
PHYSICAL AND MECHANICAL PROPERTIES
Viscosity Density Form and Color | 800 – 1,200 cPs @ 25°C Mixed 1.10 g/cc Clear Transparent Liquid |
Mix Ratio | 100 Parts to 50 Parts A By Weight or by Volume |
Working Time | 45 Minutes @25°C (77°F 100-gram mass) |
Peak Exotherm | 70°C (158°F, 100-gram mass) |
Handle Time Full Cure Time | 5.5 Hours 36 Hours minimum @ 25°C (75°F) |
Hardness | 72± 5 Shore |
Tee-Peel Strength | 5.7 Lbs per inch Width |
Tensile Shear Strength | 1,300 psi @ 25°C (77°F) |
| 800 psi @ -80°C (-112°F) |
| 550 psi @ 100°C (212°F) |
Elongation | 9.0% @ 25°C (77°F) |
Compressive Strength | 2,200 psi |
Heat Distortion Temp | 80°C (176°F) |
MAX CLR A/B Available Kit Sizes
|
MAX CLR LOW VISCOSITY 24 OUNCE
KIT |
|
|
MAX CLR LOW VISCOSITY 48 OUNCE
KIT |
|
|
MAX CLR LOW VISCOSITY 96 OUNCE
KIT |
|
|
MAX CLR LOW VISCOSITY 1.5 GALLON
KIT |
MECHANICAL PERFORMANCE TEST
Impact testing is one of the most revealing test methods that demonstrate a material's ability to resist and withstand a high-rate of pressure loading.
its behavior during and after the impact can define its maximum mechanical property and conditional limits upon its destruction.
Why is Impact Testing Important?
The impact resistance of an object provides the ultimate measure of its resistance to its definitive destruction.
With this knowledge, other aspects of mechanical performance can be accurately derived and through skillful engineering, one can determine:
The impact energies the part can be expected to see in its lifetime.
PLEASE CHECK OUT OTHER AVAILABLE RESIN SYSTEMS AT OUR eBay STORE For our complete listing, please Visit our eBay store!
DON'T FORGET OUR EPOXY MIXING KIT
Click The Link To Add To Order https://www.ebay.com/itm/222623932456
EVERYTHING YOU NEED TO MEASURE, MIX, DISPENSE OR APPLY
Proportioning the correct amount is equally as important to attain the intended cured properties of the resin system. The container in which the epoxy and curing agent is mixed is an important consideration when mixing an epoxy resin system. The container must withstand the tenacity of the chemical and must be free of contamination. Most epoxy curing agent has a degree of corrosivity, as a general practice, protective gloves should be worn when handling chemicals of the same nature.
MIXING KIT CONTENTS 1 Each Digital Scale -Durable, Accurate Up To 2000.0 Grams
4 Each 32-ounce (1 Quart) Clear HDPE Plastic Mix Cups
4 Each 16-ounce (1 Pint) Clear HDPE Plastic Mix Cups
One Size Fits All Powder-Free Latex Gloves
2 Each Graduated Syringes
Wooden Stir Sticks
Assorted Size Foam Brush
IMPORTANT NOTICE
Your purchase constitutes the acceptance of this disclaimer. Please review before purchasing this product.
The user should thoroughly test any proposed use of this product and independently conclude the satisfactory performance in the application. Likewise, if the manner in which this product is used requires government approval or clearance, the user must obtain said approval.
The information contained herein is based on data believed to be accurate at the time of publication. Data and parameters cited have been obtained through published information, PolymerProducts and Polymer Composites Inc. laboratories using materials under controlled conditions. Data of this type should not be used for a specification for fabrication and design. It is the user's responsibility to determine this Composites fitness for use.
There is no warranty of merchantability for fitness of use, nor any other express implied warranty. The user's exclusive remedy and the manufacturer's liability are limited to refund of the purchase price or replacement of the product within the agreed warranty period. PolymerProducts and its direct representative will not be liable for incidental or consequential damages of any kind. Determination of the suitability of any kind of information or product for the use contemplated by the user, the manner of that use and whether there is any infringement of patents is the sole liability of the user.
DON'T FORGET OUR EPOXY MIXING KIT
Click The Link To Add To Order https://www.ebay.com/itm/222623932456
EVERYTHING YOU NEED TO MEASURE, MIX, DISPENSE OR APPLY
1 Each Digital Scale -Durable, Accurate Up To 2000.0 Grams
4 Each 32-ounce (1 Quart) Clear HDPE Plastic Mix Cups
4 Each 16-ounce (1 Pint) Clear HDPE Plastic Mix Cups
One Size Fits All Powder-Free Latex Gloves
2 Each Graduated Syringes
Wooden Stir Sticks
Assorted Size Foam Brush
IMPORTANT NOTICE
Your purchase constitutes the acceptance of this disclaimer. Please review before purchasing this product.
The user should thoroughly test any proposed use of this product and independently conclude the satisfactory performance in the application. Likewise, if the manner in which this product is used requires government approval or clearance, the user must obtain said approval.
The information contained herein is based on data believed to be accurate at the time of publication. Data and parameters cited have been obtained through published information, PolymerProducts and Polymer Composites Inc. laboratories using materials under controlled conditions. Data of this type should not be used for a specification for fabrication and design. It is the user's responsibility to determine this Composites fitness for use.
There is no warranty of merchantability for fitness of use, nor any other express implied warranty. The user's exclusive remedy and the manufacturer's liability are limited to refund of the purchase price or replacement of the product within the agreed warranty period. PolymerProducts and its direct representative will not be liable for incidental or consequential damages of any kind. Determination of the suitability of any kind of information or product for the use contemplated by the user, the manner of that use and whether there is any infringement of patents is the sole liability of the user.