If you have our Ancel S3000 Smok detector , Much easier to find the leak with a smoke machine.The Smoke-Tek Blaster can be also be used to find other leaks, intake leaks, oil leaks, wind water and weatherstripping leaks; tractor & car cabs, EGR and exhaust systems, the list goes on. It is easily portable and compact and easy to use. Don't spend your whole day wasted looking for bad hoses, using propane or starting fluid to try and locate the leak.
1.[Wide Range of Applications]: For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats. Suitable for all car models. 2.[Powerful and Easy to Operate] : The Ancel S3000 has its own Air Pump without relying on other machines and Pressure Gauge with precise scales. Simply connect the detector with the DC12V battery, it can output thick smoke within 30s after turning on. 3.[Advanced Technology]: It works on the EVAP system. (Provided with another version that specially designed for EVAP system). Equipped with dual flow meters for accurate data display & Independently controlled Air mode and Smoke mode. 4.[Overheat & Anti-frost Protection]: This smoke detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power to secure the safety of both the operator and device. 5.[5 Years Warranty]: For damage caused by non-human factors, we promise to resend parts for free within 5 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
ANCEL S3000 Car Smoke Leak Detector is a universal and professional auto pipe leak detect tool, it will help us position cars /motorcycles leakage on the pipe systems quickly and exactly. Supports
✦ Connects to your air compressor, we use a regulator that reduces the air pressure to 1-1.5 psi safe for evap. ✦ In line Fuse for protection.
Velcro Strap --For collection of the smoke delivery hose, and power cord before storage. Smoke Outlet Port -- While set up the unit, the Smoke Delivery Hose need to be mounted onto the Smoke Outlet . Power Socket ---While set up the unit, the power cords need to plug into the power socket. State Indication and Air Control ---The <E - LED Indication> LED has two states. RED: Power ON. GREEN: Pressurized air production. While power up the unit, the LED would turn RED. Press <F - Air Control switch>, the <E - LED Indication> would turn GREEN, and the unit start to generate pressurized air. Press <F - Air Control switch> again anytime, the <E - LED Indication> would turn RED, and the unit stops generating pressurized air. State Indication and Smoke Control ---The <G - LED Indication> LED has three states. OFF: Smoke generation not started. GREEN: Smoke generation. RED: Overheat. While not smoke the unit, the LED would be OFF. Press <H - Smoke Control switch>, the <G - LED Indication> would turn GREEN, and the unit start to generate smoke. Press <H - Smoke Control switch> again anytime, the <G - LED Indication> would turn OFF, and the unit stops generating smoke. While the smoke generating chamber is overheat, for protection, the smoke generation would be halted and the <G - LED Indication> would turn RED and restart generating smoke while the smoke generating chamber cooled down, or you can switch it OFF by pressing <H - Smoke Control switch> System Pressure Gauge --The Pressure Gauge displays the output pressure of the machine if block the smoke outlet port, otherwise it shows the real time pressure of the system been testing. Pressure Decay Test: This gauge can also be used to determine if a leak exists by switching off the <F - Air Control> while the system is under pressure. If the gauge holds the displayed pressure, there is no leakage. If the displayed pressure starts drops, there is leakage in the system. Flow Meter -- The purpose of the flow meter is to provide a quick visual indication of the amount of air/smoke passing through the system being tested. If the smoke nozzle is in a closed system, and there are no leaks in that system, the flow meter will read zero (ball at bottom of scale). As the system is Flow Dial--- In many cases excessive smoke exiting a leak may make it difficult to determine the exact location of the leak. The purpose of the Flow Control Valve is to decrease the amount of smoke exiting a leak so that its position may be pinpointed without the masking effect of excessive smoke. Turn clockwise to decrease flow, counterclockwise to increase flow. This valve is also used to lock out the system under test and observe any pressure decay on the pressure gauge. Oil Level Gauge-- While set up the unit, smoke oil need to be filled into the unit, do not exceed the MAX line. Check and confirm proper oil level periodically. If the oil level is lower than the MIN line,the unit would need a refill.
1. Turn OFF the ignition of the vehicle. LEAK TEST OF VEHICLE SYSTEMS REQUIRES THE ENGINE TO BE OFF. Caution: 1.When you use this S3000 Car Smoke Leak Detector for the first time, fill with 20ml oil . Please be careful NOT to beyond this range. 2.The testing liquid : both liquid paraffin and baby oil are OK. 3.Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time. 4.Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly. 5.During the process of leak detection, please keep away from smoke-sensitive parts. 6.Do NOT run the detector over 8 minutes continuously. It needs interval rest. 7.The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later. 8.The round part of this detector has temperature, please be careful to avoid burns. 9.If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple. Warning Safety Smoke Oil The equipment iscompatible with mineral oil based baby oil like Johnson&Johnson Pink bottle. Pure #5 white oil is the best choice if available. ( This product list does not include ) .
Hook: To hang the detector when detecting. Working Indicator: It is lit when the detector works Power Switch: Power it on, and the detector works Smoke Output Tube: The smoke outlet which connecting with detection port Power Clamp: To connect with vehicle battery. The voltage is DC12V.
● Output pressure:7-12 PSI ● Output flow:<6L/min ● Power supply: DC12V,vehicle battery ● Air source: built-in ● Test oil capacity:10ml-20ml ● Material:Iron ● Length of Power Cord: 2.5Meters ● Length of Smoke Hose: 2.5Meters ● Test Oil:Mineral Oil or Baby Oil(oil not include) ● Multi Protections:Oil Outlet, Over-Heat and Over-Load Protection ● Machine Size:13cm x 8.5cm x 18.5cm ● Package Weight: 2.3kg/5 lb
1* S3000 Main Unit
|
Brand | ANCEL |
---|---|
Manufacturer Part Number | ANCEL S3000 |
Type | EVAP Machine |
OBD Interface | CAN, EOBD, OBD, OBDII |
Supported System | Fuel |
Vehicle Type | Passenger Vehicle, Heavy Duty/Commercial, Motorcycle, ATV |
Warranty | 5 Year |