Overview:
This is a 1.3-inch OLED expansion board for raspberry pi, with a 128x64 resolution and an internal controller that can communicate using SPI or I2C interfaces.
1.3 inch OLED Display HAT Expansion Board For Raspberry Pi 2B/3B for Zero W
It features a blue, 128x64 resolution OLED display driven by an SH1106 chip. It exposes 4 wire SPI, 3 wire SPI and I2C interfaces.
The display interfaces with the Raspberry through the 40-pin HAT interface. The display features a 40-pin male socket and requires for the Raspberry Pi to have a 40 pin male header soldered.
SPECIFICATION
Driver: SH1106
Interface: 4-wire SPI, 3-wire SPI, I2C
Display colour: blue
Resolution: 128x64
Operating voltage: 3.3V
INTERFACE
SYMBOL Raspberry Pi PIN (BCM) DESCRIPTION
KEY1 P21 Button 1/GPIO
KEY2 P20 Button 2/GPIO
KEY3 P16 Button 3/GPIO
Joystick Up P6 Joystick Up
Joystick Down P19 Joystick Down
Joystick Left P5 Joystick Left
Joystick Right P26 Joystick Right
Joystick Press P13 Joystick Press
SCLK P11/SCLK SPI clock input
MOSI P10/MOSI SPI data input
DC P24 Data/Command selection (high for data, low for command)
CS P8/CE0 Chip selection, low active
RST P25 Reset, low active
Driver chip: SH1106
Support interface: 4-wire SPI, 3-wire SPI, I2C
Display color: blue
Resolution: 128x64
Working voltage: 3.3V
Features:
1. Based on the standard interface design of for Raspberry pi, it is compatible with for Raspberry Pi 2 generation B/3 generation B/Zero/Zero W.
2. Support 4-wire SPI, 3-wire SPI and I2C three kinds of interfaces. The mode of communication can be selected through resistance.
3. Small size, high resolution, high definition display.
4. Board with a joystick and three pushbuttons, simple and practical.
5. Provide a complete set of supporting materials manual (For Raspberry/For Arduino/STM32 and other sample programs).
Package list:
1 x 1.3 inch OLED Expansion Board