• Attention Please:  This item only supports model with double position, if your RC model only has a single position switch to activate it, then this item may not fit for your RC model.
  • This item does not support 3.3v receivers.
  •  
  • Descriptions:

Diysportshop8

You can find all you need here

                                                   
Q1 Remote Control Relay Switch PWM Switch for RC Airplane Drone FPV Quadcopter Upgrade

Attention Please:  This item only supports model with double position, if your RC model only has a single position switch to activate it, then this item may not fit for your RC model.

This item does not support 3.3v receivers.

 

Descriptions:

  • Only supports 5V receivers, only supports 5V receivers, only supports 5V receivers.
  • 1 channel servo signal input, control two electronic switches
  • Maximum 10A current, all relay ports are led out
  • One LED power indication working status + two relay status indicators
  • Three-stage switch and proportional channel can be controlled
  • With power-on protection function (the power-on remote control terminal does not move in the middle position), easy to operate
  • Input channels do not need to be calibrated, compatible with various brands of remote control devices
  • Adopt transparent heat-shrinkable rubber, stylish appearance and clear working status
  • Small size and light weight
  • Pin-type wiring is convenient and fast

 

Application range:

  • Remote control model rocket launch
  • Remote control model smoke control
  • weapon system control like real machine
  • Model aircraft's smoke control
  • Control of various remote switch systems

 

Functional Description:

  • The remote switch remotely controls the electrical equipment on the aircraft model through a switch channel on the remote control, and the LED dynamically demonstrates the current switch state in real time, so that it can be quickly started without an operation manual.
  • This device does not require calibration and can be accurately compatible with remote control devices of various brands.

 

Application:

1. Connect:

  • Plug the signal input cable into an idle receiver channel that corresponds to a switch on the remote.
  • The power indicator will be illuminated when connected to the receiver.
  • The work indicator lights up when the switch channel is open and vice versa.

 

2. Working mode:

  • The red LED light indicates the power indicator.
  • The blue LED indicates the relay's operating status.

 

3. Trigger:

 

  • (Take the throttle passage as an example) Turn the throttle lever on the remote control to the full throttle, and a relay is closed (that is, the common terminal and the normally open terminal are connected, and the common terminal and the normally closed terminal are disconnected). Turn the throttle lever on the remote control to the half throttle, and the two relays are not closed (that is, the common terminal and the normally open terminal are disconnected, and the common terminal and the normally closed terminal are connected). Turn the throttle lever on the remote control to the minimum throttle and the other relay to close (that is, the common and normally open terminals are connected, and the common and normally closed ends are disconnected). (Take the three-stage switch channel as an example) Turn the three-segment switch on the remote control to the high position, and one relay is closed (that is, the common terminal and the normally open terminal are connected, and the common terminal and the normally closed terminal are disconnected). Turn the three-segment switch on the remote control to the neutral position, and the two relays will not operate (ie, the common terminal and the normally open terminal are disconnected, and the common terminal and the normally closed terminal are connected). Turn the three-stage switch on the remote control to the low position, and the other relay is closed (that is, the common terminal and the normally open terminal are connected, and the common terminal and the normally closed terminal are disconnected).

 

Package Included:

  • 1 x Q1 RC relay switch
  • 1 x self-sealing anti-static bag

Item Specifics
Brand :Unbranded
MPN :Does Not Apply
Type :Relay Switch
Compatible Fuel Type :Electric
Compatible Brand :Universal
Model :Q1
Country/Region of Manufacture :China

Payment

We accept PayPal only.

All major credit cards are accepted through secure payment processor PayPal.

Payment must be received within 7 business days of auction closing.

If you have bought multiple items from me, you can send me one payment for all the

items Instead of paying for them individually. When you click the Pay Now button, eBay

will Automatically determine if there are other items you have won or purchased from me

and will combine them for your review.

NOTE:

Import duties, taxes and chargers are not included in the item price or shipping charges.

These charges are the buyer's responsibility.

Please check with your country's customs office to determine what these additional

costs will be prior to bidding buying.

Shipping

We Ship to Worldwide.

Items will be shipped out within handling time (1-2 business day) on payment received normally.

Item are shipped from shenzhen,China via epacket or China Post, which will take around 10 to 20 business days to deliver in some developed countries like Europe & America (Most area) and to Other countries:15-60 business days.

Delivery time depends on destination and other factors, it may takes up to 20 business days.

Returns

12 months Warranty. Buy with confidence!

If you are not satisfied when you receive your item, please return it within 30 days for a

replacement or money back. Please contact me before you return it.

If item is defective in 3 months, We will send you a replacement without extra charger, or offer refund after we receive the defective item.

If item is defective after 3 months, you can still send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.

Contact Us

Monday - Friday: 9:00 AM - 6:00 PM Standard Beijing Time


Saturday, Sunday and all Public Holidays: Closed


We apologize for the late reply during the holidays.

Feedback

We are not responsible for any custom duty or import tax.

We will leave u POSITIVE FEEDBACK after receiving the payment. Please contact us if you are not satisfied with the item after receiving it or if u need any help when u received the pkg.

All messages will be answered ASAP within 1 business day. If you have not receive our reply, please kindly re-sent your message and we will reply to you as soon as possible.

Serious Buyer Only! Please place bid only if you agree with all the terms.

If you have any problems or concerns whatever with your order or products, please message us and give us a chance to assist you before you leave any feedback.

We believe we can produce a positive outcome to any situation and will work hard to earn your praise.

If you were pleased with this transaction, Please give us 5 STAR RATING, thx in advance!

Diysportshop8

You can find all you need here


Q1 Remote Control Relay Switch PWM Switch for RC Airplane Drone FPV Quadcopter Upgrade

Attention Please:  This item only supports model with double position, if your RC model only has a single position switch to activate it, then this item may not fit for your RC model.

This item does not support 3.3v receivers.

 

Descriptions:

  • Only supports 5V receivers, only supports 5V receivers, only supports 5V receivers.
  • 1 channel servo signal input, control two electronic switches
  • Maximum 10A current, all relay ports are led out
  • One LED power indication working status + two relay status indicators
  • Three-stage switch and proportional channel can be controlled
  • With power-on protection function (the power-on remote control terminal does not move in the middle position), easy to operate
  • Input channels do not need to be calibrated, compatible with various brands of remote control devices
  • Adopt transparent heat-shrinkable rubber, stylish appearance and clear working status
  • Small size and light weight
  • Pin-type wiring is convenient and fast

 

Application range:

  • Remote control model rocket launch
  • Remote control model smoke control
  • weapon system control like real machine
  • Model aircraft's smoke control
  • Control of various remote switch systems

 

Functional Description:

  • The remote switch remotely controls the electrical equipment on the aircraft model through a switch channel on the remote control, and the LED dynamically demonstrates the current switch state in real time, so that it can be quickly started without an operation manual.
  • This device does not require calibration and can be accurately compatible with remote control devices of various brands.

 

Application:

1. Connect:

  • Plug the signal input cable into an idle receiver channel that corresponds to a switch on the remote.
  • The power indicator will be illuminated when connected to the receiver.
  • The work indicator lights up when the switch channel is open and vice versa.

 

2. Working mode:

  • The red LED light indicates the power indicator.
  • The blue LED indicates the relay's operating status.

 

3. Trigger:

 

  • (Take the throttle passage as an example) Turn the throttle lever on the remote control to the full throttle, and a relay is closed (that is, the common terminal and the normally open terminal are connected, and the common terminal and the normally closed terminal are disconnected). Turn the throttle lever on the remote control to the half throttle, and the two relays are not closed (that is, the common terminal and the normally open terminal are disconnected, and the common terminal and the normally closed terminal are connected). Turn the throttle lever on the remote control to the minimum throttle and the other relay to close (that is, the common and normally open terminals are connected, and the common and normally closed ends are disconnected). (Take the three-stage switch channel as an example) Turn the three-segment switch on the remote control to the high position, and one relay is closed (that is, the common terminal and the normally open terminal are connected, and the common terminal and the normally closed terminal are disconnected). Turn the three-segment switch on the remote control to the neutral position, and the two relays will not operate (ie, the common terminal and the normally open terminal are disconnected, and the common terminal and the normally closed terminal are connected). Turn the three-stage switch on the remote control to the low position, and the other relay is closed (that is, the common terminal and the normally open terminal are connected, and the common terminal and the normally closed terminal are disconnected).

 

Package Included:

  • 1 x Q1 RC relay switch
  • 1 x self-sealing anti-static bag
Item Specifics
Brand :Unbranded
MPN :Does Not Apply
Type :Relay Switch
Compatible Fuel Type :Electric
Compatible Brand :Universal
Model :Q1
Country/Region of Manufacture :China


We accept PayPal only.

All major credit cards are accepted through secure payment processor PayPal.

Payment must be received within 7 business days of auction closing.

If you have bought multiple items from me, you can send me one payment for all the

items Instead of paying for them individually. When you click the Pay Now button, eBay

will Automatically determine if there are other items you have won or purchased from me

and will combine them for your review.

NOTE:

Import duties, taxes and chargers are not included in the item price or shipping charges.

These charges are the buyer's responsibility.

Please check with your country's customs office to determine what these additional

costs will be prior to bidding buying.

We Ship to Worldwide.

Items will be shipped out within handling time (1-2 business day) on payment received normally.

Item are shipped from shenzhen,China via epacket or China Post, which will take around 10 to 20 business days to deliver in some developed countries like Europe & America (Most area) and to Other countries:15-60 business days.

Delivery time depends on destination and other factors, it may takes up to 20 business days.

12 months Warranty. Buy with confidence!

If you are not satisfied when you receive your item, please return it within 30 days for a

replacement or money back. Please contact me before you return it.

If item is defective in 3 months, We will send you a replacement without extra charger, or offer refund after we receive the defective item.

If item is defective after 3 months, you can still send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.

Monday - Friday: 9:00 AM - 6:00 PM Standard Beijing Time


Saturday, Sunday and all Public Holidays: Closed


We apologize for the late reply during the holidays.

We are not responsible for any custom duty or import tax.

We will leave u POSITIVE FEEDBACK after receiving the payment. Please contact us if you are not satisfied with the item after receiving it or if u need any help when u received the pkg.

All messages will be answered ASAP within 1 business day. If you have not receive our reply, please kindly re-sent your message and we will reply to you as soon as possible.

Serious Buyer Only! Please place bid only if you agree with all the terms.

If you have any problems or concerns whatever with your order or products, please message us and give us a chance to assist you before you leave any feedback.

We believe we can produce a positive outcome to any situation and will work hard to earn your praise.

If you were pleased with this transaction, Please give us 5 STAR RATING, thx in advance!


All rights reserved.


DataCaciques