Protezione Autoworks 

 

Gloss black sunstrip decal sticker set to suit VW MK5 Golf (Photo shown is matte black, for example only)


THIS KIT INCLUDES CUT OUT FOR SENSOR. If this is not required, please mention on the order notes.


 THIS DECAL IS PRE CUT SO NO TRIMMING IS REQUIRED BY THE INSTALLER

( A 1 - 2mm border should be left around the edges when installing)

 

The decal is supplied on a polymeric calendered sign vinyl with a 7 year durability. 

  

Orders are shipped within 48 hours and are sent via MyHermes courier. 

 

----------------------------

 

Application instructions; (Suitable for dry or wet application) We recommend wet.

 

-------------------------

 

1 - Clean the area thoroughly with soap and water, then use isopropyl alcohol to ensure the area is degreased.  Do not use glass cleaner.

2- Using a Trigger spray bottle, squirt the water over the screen and surrounding areas where the strip is to be fitted. 

3- Peel the sticker from the release liner and spray the adhesive side with with water again. 

4 - Position onto the glass and ensure the strip is fitted with a 1-2 mm even border on the top and side edges. A spare pair of hands will help here.

5 - Apply the sticker using a vinyl squeegee, be sure to work evenly to push out all of the water. It is best to squeegee from the middle outwards. 

6- Allow the ahdesive to begin to cure, this will take around 30 minutes depending on your climate temperature. You can now spray the application tape on-top of the sticker and slowly remove the tape. 

7 - check for any lifted edges or bubbles. Then should be pressed down and or popped.