eBay

Feartures:

‧AC input range selectable by switch

‧Withstand 300VAC surge input for 5 second

‧Protections: Short circuit / Overload / Over voltage / Over temperature

‧Cooling by free air convection

‧1U low profile

‧Withstand 5G vibration test

‧LED indicator for power on

‧No load power consumption<0.75W

‧100% full load burn-in test

‧High operating temperature up to 70℃

‧Operating altitude up to 5000 meters (Note.8)

‧High efficiency, long life and high reliability

‧3 years warranty

Applications:

‧Industrial automation machinery

‧Industrial control system

‧Mechanical and electrical equipment

‧Electronic instruments, equipment or apparatus

Description:

LRS-200 series is a 200W single-output enclosed type power supply with 30mm of low profile design.
Adopting the input of 115VAC or 230VAC input (selected by switch), the entire series provides an output voltage line of 3.3V, 5V, 12V, 15V, 24V, 36V and 48V.
In addition to the high efficiency up to 90%, the design of metallic mesh case enhances the heat dissipation of LRS-200 that the whole series operates from -25℃ through 70℃ under air convection without a fan.
Delivering an extremely low no load power consumption (less than 0.75W).
It allows the end system to easily meet the worldwide energy requirement.
LRS-200 has the complete protection functions and 5G anti- vibration capability.
It is complied with the international safety regulations such as  , IEC/UL 62368 - 1.
LRS-200 series serves as a high price- to- performance power supply solution for various industrial applications.

MODEL

LRS-200-3.3

LRS-200-4.2

LRS-200-5

LRS-200-12

LRS-200-15

LRS-200-24

LRS-200-36

LRS-200-48

OUTPUT

DC VOLTAGE

3.3V

4.2V

5V

12V

15V

24V

36V

48V

RATED CURRENT

40A

40A

40A

17A

14A

8.8A

5.9A

4.4A

CURRENT RANGE

0 ~ 40A

0 ~ 40A

0 ~ 40A

0 ~ 17A

0 ~ 14A

0 ~ 8.8A

0 ~ 5.9A

0 ~ 4.4A

RATED POWER

132W

168W

200W

204W

210W

211.2W

212.4W

211.2W

RIPPLE & NOISE (max.) Note.2

150mVp-p

150mVp-p

150mVp-p

150mVp-p

150mVp-p

150mVp-p

200mVp-p

200mVp-p

VOLTAGE ADJ. RANGE

2.97 ~ 3.6V

3.6 ~ 4.4V

4.5 ~ 5.5V

10.2 ~ 13.8V

13.5 ~ 18V

21.6 ~ 28.8V

32.4 ~ 39.6V

43.2 ~ 52.8V

VOLTAGE TOLERANCE Note.3

±3.0%

±4.0%

±3.0%

±1.5%

±1.0%

±1.0%

±1.0%

±1.0%

LINE REGULATION Note.4

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

LOAD REGULATION Note.5

±2.5%

±2.5%

±2.0%

±1.0%

±0.5%

±0.5%

±0.5%

±0.5%

SETUP, RISE TIME

1300ms, 50ms/230VAC          1300ms,50ms/115VAC at full load

HOLD UP TIME (Typ.)

16ms/230VAC      12ms/115VAC at full load

INPUT

VOLTAGE RANGE

90 ~ 132VAC / 180 ~ 264VAC by switch          240 ~ 370VDC   (switch on 230VAC)

FREQUENCY RANGE

47 ~ 63Hz

EFFICIENCY (Typ.)

83%

86%

87%

87.5%

88%

89.5%

89.5%

90%

AC CURRENT (Typ.)

4A/115VAC          2.2A/230VAC

INRUSH CURRENT (Typ.)

COLD STAR 60A/115VAC         60A/230VAC

LEAKAGE CURRENT

<2mA / 240VAC

PROTECTION

OVER LOAD

110 ~ 140% rated output power

3.3~36V Hiccup mode, recovers automatically after fault condition is removed. 48V Shut down and latch off o/p voltage, re-power on to recover.

OVER VOLTAGE

3.8 ~ 4.45V

4.6 ~ 5.4V

5.75 ~ 6.75V

13.8 ~ 16.2V

18 ~ 21V

28.8 ~ 33.6V

41.4 ~ 46.8V

55.2 ~ 64.8V

3.3~36V Hiccup mode, recovers automatically after fault condition is removed. 48V Shut down and latch off o/p voltage, re-power on to recover.

OVER TEMPERATURE

3.3~36V Hiccup mode, recovers automatically after fault condition is removed. 48V Shut down and latch off o/p voltage, re-power on to recover.

ENVIRONMENT

WORKING TEMP.

-25 ~ +70℃ (Refer to "Derating Curve")

WORKING HUMIDITY

20 ~ 90% RH non-condensing

STORAGE TEMP., HUMIDITY

-40 ~ +85℃, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/℃ (0 ~ 50℃)

VIBRATION

10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY

SAFETY STANDARDS

IEC/UL62368-1,BSMICNS14336-1,EACTPTC004,KCK60950-1(forLRS-200-12/24only),AS/NZS62368.1approved

WITHSTAND VOLTAGE

I/P-O/P:3KVAC    I/P-FG:2KVAC    O/P-FG:0.5KVAC

ISOLATION RESISTANCE

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH

EMC EMISSION

Compliance to BSMI CNS13438, EAC TP TC 020,KC KN32,KN35(for LRS-200-12/24 only)

EMC IMMUNITY

Compliance to EAC TP TC 020,KC KN32,KN35(for LRS-200-12/24 only)

OTHERS

MTBF

347.5K hrs min.      MIL-HDBK-217F (25℃)

DIMENSION

215*115*30mm (L*W*H)

PACKING

0.66Kg; 15pcs/10.9Kg/0.78CUFT

NOTE

1.   All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2.   Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3.   Tolerance : includes set up tolerance, line regulation and load regulation.

4.   Line regulation is measured from low line to high line at rated load.

5.   Load regulation is measured from 0% to 100% rated load.

6.   Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.

7. The 150% peak load capability is built in for up to 1 second for 12~48V.LRS-200 will enter hiccup mode if the peak load is delivered for over 1 second and will recover once it resumes to the rated current level(115VAC/230VAC).

8.   The ambient temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m(6500ft).

9.   This power supply does not meet the harmonic current requirements outlined by EN61000-3-2. Please do not use this power supply under the following conditions:

a)   the end-devices is used within the European Union, and

b)   the end-devices is connected to public mains supply with 220Vac or greater rated nominal voltage, and

c)   the power supply is:

- installed in end-devices with average or continuous input power greater than 75W, or

- belong to part of a lighting system Exception:

Power supplies used within the following end-devices do not need to fulfill EN61000-3-2

a)   professional equipment with a total rated input power greater than 1000W;

b)   symmetrically controlled heating elements with a rated power less than or equal to 200W

MODEL		LRS-200-3.3	LRS-200-4.2	LRS-200-5	LRS-200-12	LRS-200-15	LRS-200-24	LRS-200-36	LRS-200-48
OUTPUT	DC VOLTAGE	3.3V	4.2V	5V	12V	15V	24V	36V	48V
	RATED CURRENT	40A	40A	40A	17A	14A	8.8A	5.9A	4.4A
	CURRENT RANGE	0 ~ 40A	0 ~ 40A	0 ~ 40A	0 ~ 17A	0 ~ 14A	0 ~ 8.8A	0 ~ 5.9A	0 ~ 4.4A
	RATED POWER	132W	168W	200W	204W	210W	211.2W	212.4W	211.2W
	RIPPLE & NOISE (max.) Note.2	150mVp-p	150mVp-p	150mVp-p	150mVp-p	150mVp-p	150mVp-p	200mVp-p	200mVp-p
	VOLTAGE ADJ. RANGE	2.97 ~ 3.6V	3.6 ~ 4.4V	4.5 ~ 5.5V	10.2 ~ 13.8V	13.5 ~ 18V	21.6 ~ 28.8V	32.4 ~ 39.6V	43.2 ~ 52.8V
	VOLTAGE TOLERANCE Note.3	±3.0%	±4.0%	±3.0%	±1.5%	±1.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION Note.4	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	LOAD REGULATION Note.5	±2.5%	±2.5%	±2.0%	±1.0%	±0.5%	±0.5%	±0.5%	±0.5%
	SETUP, RISE TIME	1300ms, 50ms/230VAC 1300ms,50ms/115VAC at full load
	HOLD UP TIME (Typ.)	16ms/230VAC 12ms/115VAC at full load
INPUT	VOLTAGE RANGE	90 ~ 132VAC / 180 ~ 264VAC by switch 240 ~ 370VDC (switch on 230VAC)
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	83%	86%	87%	87.5%	88%	89.5%	89.5%	90%
	AC CURRENT (Typ.)	4A/115VAC 2.2A/230VAC
	INRUSH CURRENT (Typ.)	COLD STAR 60A/115VAC 60A/230VAC
	LEAKAGE CURRENT	<2mA / 240VAC
PROTECTION	OVER LOAD	110 ~ 140% rated output power
	OVER LOAD	3.3~36V Hiccup mode, recovers automatically after fault condition is removed. 48V Shut down and latch off o/p voltage, re-power on to recover.
	OVER VOLTAGE	3.8 ~ 4.45V	4.6 ~ 5.4V	5.75 ~ 6.75V	13.8 ~ 16.2V	18 ~ 21V	28.8 ~ 33.6V	41.4 ~ 46.8V	55.2 ~ 64.8V
	OVER VOLTAGE	3.3~36V Hiccup mode, recovers automatically after fault condition is removed. 48V Shut down and latch off o/p voltage, re-power on to recover.
	OVER TEMPERATURE	3.3~36V Hiccup mode, recovers automatically after fault condition is removed. 48V Shut down and latch off o/p voltage, re-power on to recover.
ENVIRONMENT	WORKING TEMP.	-25 ~ +70℃ (Refer to "Derating Curve")
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85℃, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 50℃)
	VIBRATION	10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY	SAFETY STANDARDS	IEC/UL62368-1,BSMICNS14336-1,EACTPTC004,KCK60950-1(forLRS-200-12/24only),AS/NZS62368.1approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION	Compliance to BSMI CNS13438, EAC TP TC 020,KC KN32,KN35(for LRS-200-12/24 only)
	EMC IMMUNITY	Compliance to EAC TP TC 020,KC KN32,KN35(for LRS-200-12/24 only)
OTHERS	MTBF	347.5K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION	21511530mm (LWH)
	PACKING	0.66Kg; 15pcs/10.9Kg/0.78CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. 7. The 150% peak load capability is built in for up to 1 second for 12~48V.LRS-200 will enter hiccup mode if the peak load is delivered for over 1 second and will recover once it resumes to the rated current level(115VAC/230VAC). 8. The ambient temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m(6500ft). 9. This power supply does not meet the harmonic current requirements outlined by EN61000-3-2. Please do not use this power supply under the following conditions: a) the end-devices is used within the European Union, and b) the end-devices is connected to public mains supply with 220Vac or greater rated nominal voltage, and c) the power supply is: - installed in end-devices with average or continuous input power greater than 75W, or - belong to part of a lighting system Exception: Power supplies used within the following end-devices do not need to fulfill EN61000-3-2 a) professional equipment with a total rated input power greater than 1000W; b) symmetrically controlled heating elements with a rated power less than or equal to 200W