HOT ROD VEGA MANUAL CROSS STEERING BOX W/ FLAT PITMAN ARM & 1935-41 FORD BRACKET
This 1932-41Fords Vega Box comes complete with the pitman arm, mounting bracket, and black ujoint
Fords Vega Box:
- It is ideal for Street Rod applications and is smoother and stronger than OEM boxes.
- Steering Shaft Spline: 5/8"-36
- Ratio: 20 : 1
- 5 1/2" Turns (Lock-to-Lock)
- Mounting pattern is 2 3/4" and 4 3/8" center-to-center of the three mounting holes
- This is the stock configuration, meaning when you turn the input shaft clockwise, the output shaft also turns clockwise
- Recommended for vehicles weighing 2800 lbs or less
- Comes complete with the chrome dress cap.
Mounting BRACKET:
- This bracket is designed to fit the tapered frames of the 1935-1941 Fords
- It measures 3.155" between the tabs at the front and 3.380" between the tabs at the rear
Pitman Arm:
- The pitman arm is ZINC and non-offset design. Double-tapered "Ford" tie rod end hole allows you to attach the drag link on the top or on the bottom.
- Tapered tie rod hole measures 0.625" on both sides and tapers down to 0.585" in the center of the hole.
- Spline Count: 36
- Hole Diameter .625
- Overall Length 7.87Center to Center 6.375
Black Ujoint:
- 5/8-36" x
3/4" DD Black U-Joint.
Professional Installation is Highly Recommended(Installation Instruction is NOT Included)