this article according to §12 Paragraph 3 USTG 0% Buy VAT Click here!

Complete set 1x130 Watt poly solar module 10A charge controller yellow cable solar photovoltaic island system

Solar system 130 watts 12 volts POLY

For garden, camping, motorhomes, boats

This system is ideal for supplying gardens, campsites, camping, boats, mobile homes, weekend houses or even your home. Basic set for setting up an independent solar power system. We have put together this system in such a way that there is only a minimum of installation effort required.

To store the electricity generated, you need a 12V battery storage (rechargeable battery). This set is suitable for charging lead acid, gel and AGM rechargeable batteries (batteries).

All components are pre-assembled and only need to be plugged together according to the enclosed connection diagram! And off you go with your own electricity…

Scope of delivery:

• 1 piece solar module 130 watt polycrystalline 
• 1 piece 10A LCD solar charge controller yellow
• 1 pair of 2m 4mm² connection cable charge controller -> battery with battery terminals 
• 1 pair of 5m 4mm² connection cable module -> charge controller with pressed solar plugs

Technical description of the components:

Solar module

Tested and certified quality module

The solartronics 130 Watt poly solar module is a universally applicable module with modern 5-busbar technology and high-quality poly solar cells. Our 130 W solar module is designed and performance-specific and is suitable for stand-alone systems.

Advantages:

• Power (Pmax): 130W
• Proven quality tested directly by solartronics according to valid standards: EN 61215-1, EN 61215-2, EN 61730-1, EN 61730-2
• Manufactured according to the latest standards
• monocrystalline A-grade solar cells
• Cell structure with 5 busbars
• Connection cable in 4 mm² cable and solar plug
• Extremely resistant ESG glass makes the module usable even in the most adverse environmental conditions
• ideal for 12V-24V systems on land or in mobile solar systems

Technical data module:

• Weight: 11kg
• Dimensions: 1290mm x 675mm x 35mm
• Permissible system voltage: 1000 V
• Open circuit voltage Voc: 22.25 V
• Temperature range: -40°C to +80°C
• Nominal power Pmax: 130 W +3%
• Nominal voltage Vmp: 18.13 V
• Rated current Imp: 7.17 A
• Short circuit current Isc: 7.63 A

The black protective edges are an additional service from us to protect your module corners during transport. These corners can be removed before installing the modules.

Charge controller

The charge controller is connected between the solar modules and the battery and is therefore responsible for controlling the charging process, so the battery can always be charged to the maximum. A built-in microprocessor charges the battery gently, guaranteeing your battery a long service life.

All voltages, charging processes and parameters can be shown on the display. You can set the final charging voltage using the control panel, so the solar charge controller can be used on any battery. You can set the voltage from which the undervoltage protection should be activated and from which operating voltage the undervoltage protection should reset again.

Overcharging the battery can be prevented because the charge controller stops the charging process when the set end-of-charge voltage is reached and switches to trickle charging.

Advantages:

• Over- and deep-discharge protection for the battery prevents feed back to the solar panel
• Automatic shutdown should the charging current exceed the capacity of the controller
• Automatic shutdown in the event of a short circuit
• Prevents feedback to the panel
• Automatic shutdown in the event of overload and short circuit
• Consumers are switched off when the accumulators are undervolted
• Overload and short-circuit protection, consumer shutdown in the event of accumulator undervoltage
• Automatic temperature compensation
• Automatic voltage level identification system
• Intelligent PWM charging mode
• Adjustable final charging voltage
• Night and time control
• Display of charging and discharging power in Ah
• Protection against battery discharge via solar connection
• Undervoltage shutdown of the small consumer output
• Protection in the event of battery polarity reversal
• Protection against overload and short circuits
• for lead acid, gel and AGM batteries (batteries)
• Representation with LCD graphic display
• Display of the battery charge status is displayed

Details:

• Weight: 0.2kg
• Battery voltage: 12V or 24V automatic detection
• Charging current: 10 A
• Own consumption: < 20 mA
• Dimensions: 170mm x 95mm x 45mm
• Color: gray/black

A 130 watt module can be connected to the 10 A charge controller.

The cable sets supplied are configured and checked by our employees. They contain the necessary connections (solar plugs, battery terminals or wire end sleeves). Tested solar cables made in Germany are used.

Product features