template  

　

THC HP105 Torch Height Controller for Arc Voltage CNC Plasma Cutting Machine 24V


Description:

HP105 plasma torch height controller is equipped with constant current plasma. During cutting courses, the current always equals the given current. And the cutting arc voltage will be changed with the fixed speed being the height of torch changing.

- When the distance gets farther，the arc voltage increases; On the opposite, the arc voltage will decrease. HP105 plasma arc voltage height controller will inspect the voltage change, then control the distance between cutting torch and material via the lift motor. So that the arc voltage is fixed, the same is the height of cutting torch. Generally, the instruction will list all the cutting parameters for some type of plasma.

- The user can refer to these parameters. Adjust the voltage in the arc voltage height controller to match the selected current. The torch height will keep constant under regular speed. In fact, the user should set the arc voltage according to the height of the cutting torch. In the status of automation, the arc voltage higher, then the height of the cutting torch higher.


Specification:

Working voltage: DC24±10%，50Hz/60Hz，Please prepare an isolated power, do not share with others such as an electronic valve. Especial Pay more attention the DC 24V

Lift motor: DC24V DC motor

Drive mode: PWM

Output current: 1A-4A.

Working temperature: Height controller -10∽60℃

HS style: Switch inspecting IHS (suitable for all plasma

both above-water and under-water cutting)， Plasma Shield

Protector IHS (suitable for above-water cutting’s touch

leading arc voltage plasma)

Running transfer: Alternative Arc transfer and pierce transfer

Divided voltage ratio:100:1

Accuracy: ±1V∽±5V, adjustable

Dimension: 225mmX50mmX80mm

Weight: 0.8kg

Protection class: IP64, to prevent dust from entering.

Installation connector: 2-pin, 4-pin, 5-pin, DB-9 core

Installation position: Keep away from heat, air convection good place.


Function Description:

LCD: display the working status and parameters.

Manual: Auto / Manual mode selection increase, alternating work.

Arc test: standby press, arcing into the test mode.When arcing test, press to return to standby mode.

Menu: In standby, mode press to enter the parameter setting mode.

When the parameter setting Press to return to standby.

Confirmation: parameter setting mode, confirm that the set parameters.

Rise/fall: In standby mode, manual lifting torch.When parameter sets, subtraction parameter values.

　

1.Your valid phone number is  very necessary for the shipping, otherwise we can't guarantee that  the package would safely arrives.
2. Any Customs tax applied to this package should be covered by  buyers.

　

What in  Package:

1 x HP105 Torch Height Controller

　

Contact Us:
1. We have always been trying to provide the best service and reliable products  for every customer, however, accident may happen sometimes, please contact us to  resolve any issue before leaving a negative feedback.
2. Please contact us by "Ask a question".

　

Payment
 1. Payment methods  accepted : Paypal  only.
2. Payment must be  received within 7  business days of  auction closing.

 

Shipping

1. We ship your  orders within 1-2  business days after  the payment  received.

2. Item shipped via  Singapore Post or  HongKong Post , It  takes about 7-14  business days (USA,CA,AU,UK). others  country 10-20  business  days(Brzil,India,RU), Exact  delivery time  depends on postal  process.

3. If you do not  receive your item(s)  by 30 business  days, Please feel  free to contact us  via ebay mail system  , we will try our  very best to resolve  any problems with  you 

 

Return Policy

1. Return is  accepted within 14  days after the  buyer's receiving  the item.

2. If this item is  defective upon  receipt, customer  has up to 14 days  from date of receipt  for exchange of a  new one.

3. Unused/unopened  merchandise will be  fully credited.

 

Other Policies

 

We are not  responsible for any  custom duty or  import tax.

　

Any customs duty applied to the parcel  should be covered by the buyer.

As has been stated on the eBay item description, Import duties, taxes and  charges are not included in the item price and shipping charges.
These charges be at the buyer responsibility. meanwhile the customs tax depend  on the buyer local customs office.

 

If you need we write  low price on  shipping bill, pls  leave message when  you make payment .

 

All emails will be  answered within 24  hours. If you do not  receive our reply,  please kindly  re-sent your email  and we will reply to  you as soon as  possible, Suggest  send eBay message to  us, That is easy to  find .
　

　

PushAuction