An Encoder Cable and a Power Cable (3 meter long, each) are INCLUDED in the Set price.
Note:
you can check our PL80-series Planetary gearboxes,
25 Ohm/200W Regenerative resistors,
20A/220VAC Input RFI Noise Filters and
shaft 19mm Flexible Couplings
for complete adaptability to your purchase, if you need any of these elements.
- In order to save your time in commissioning, we have a ready-to-use Control Cable (shielded) with 13 mostly used Pins soldered.
You can add it to your order, too. It is highly recommended to let the Project run easily and quickly.
- More technical information:
In Position Mode, The P100H-series servo drives can accept 5V or 24V (or any voltage level below 24V) pulse train from a controller or PLC.
They have 8 Internal Positioning, PTP, capability, too.
The Input Command Pulses can be wired in PNP, NPN or Differential configuration.
The Digital Inputs of the drive can be wired either PNP or NPN, (but not both at the same time).
17bit encoder has 131,072 pulse per revolution as feedback.
- Please contact us for comprehensive Operation manual.